EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical study of particle removal from silicon wafers by supercritical CO2 in oscillatory cleaning mode

Tao Deng, Jixiong Liu, Fei Teng, Zongkun Li

PLOS One · 17.11.2026 · 21 (11) · e0349637

DOI: 10.1371/journal.pone.0349637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 17.11.2026. Verfasst von Tao Deng und 3 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Key Laboratory of Efficient and Clean Energy Utilization, South China University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During device fabrication, metal particles tend to adhere to the microstructures of silicon wafers, which in turn affects their proper operation. The use of supercritical carbon dioxide (SC-CO 2 ) to clean silicon wafers is an efficient approach. In this work, the effect of SC-CO 2 on particle removal from silicon wafers was studied numerically. Based on the oscillatory cleaning mode, the force model and the cleaning mechanism of particles were established, and the related parameters were analyzed. The results show that as the SC-CO 2 operating parameters changed periodically, the thermophysical properties, such as density and viscosity of SC-CO 2 , varied accordingly, causing fluctuations in the local flow around the particles. The particles located at the top of the cantilever were more difficult to remove, and therefore require particular attention. Increasing the oscillation frequency and pressure range of SC-CO 2 , as well as optimizing the temperature, could increase the force exerted on the particles. At an oscillation frequency, pressure range, and temperature of 30 min -1 , 8.5–11.5 MPa, and 315 K, respectively, the peak horizontal and vertical forces reached 35.9 × 10 −10 N and 1040.4 × 10 −10 N, respectively. Particle removal became more difficult as particle size increased. Optimizing the SC-CO 2 operating parameters expanded the time and particle-size ranges in which particles could be effectively removed, thereby improving particle removal.

Förderung

  • Guangdong Key Laboratory of Efficient and Clean Energy Utilization, South China University of Technology

Zitieren

APA

Deng, T., Liu, J., Teng, F., & Li, Z. (2026). Numerical study of particle removal from silicon wafers by supercritical CO2 in oscillatory cleaning mode. PLOS One, 21(11), e0349637. https://doi.org/10.1371/journal.pone.0349637

Vancouver

Deng T, Liu J, Teng F, Li Z. Numerical study of particle removal from silicon wafers by supercritical CO2 in oscillatory cleaning mode. PLOS One. 2026;21(11):e0349637. doi:10.1371/journal.pone.0349637

BibTeX
@article{Deng2026,
  author = {Deng, Tao and Liu, Jixiong and Teng, Fei and Li, Zongkun},
  title = {Numerical study of particle removal from silicon wafers by supercritical CO2 in oscillatory cleaning mode},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {11},
  pages = {e0349637},
  doi = {10.1371/journal.pone.0349637}
}
Kostenlos starten →