EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the stability of morphology and performance of neural interfacing electrodes fabricated via CO2-snow-assisted hierarchical surface restructuring

Alexander Blagojevic iD, Wesley Seche, Pouya Tavousi iD, Sina Shahbazmohamadi, Shahram Amini iD

PLOS One · 09.07.2026 · 21 (7) · e0349598

DOI: 10.1371/journal.pone.0349598 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 09.07.2026. Verfasst von Alexander Blagojevic und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, University of Connecticut, Storrs, Connecticut, United States of America. Hauptthemen laut MEDLINE: Carbon Dioxide, Electrodes, Implanted. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Long-term implantable neural interfacing devices play a critical role in treating various neurological disorders, with their functionality largely dependent on the performance of electrodes and microelectrode arrays. Femtosecond laser Hierarchical Surface Restructuring (HSR™) is an advanced surface treatment technology that significantly enhances a platinum-10% iridium (Pt-10Ir) electrode’s electrochemical performance, improving energy efficiency, specificity, and signal-to-noise ratio. Additionally, HSR™ facilitates electrode miniaturization, allowing them to be manufactured smaller, for a less invasive profile. Electrode surfaces produced via HSR™ technology contain multiscale structures, including nanoscale features that, while contributing to superior performance, are sometimes weakly bonded and may detach due to mechanical agitation during testing or implantation. This detachment could lead to a high initial performance, that may gradually decline during prolonged use. Preemptively removing these nanostructures stabilizes the electrode surface, enhancing the stability of its morphology and potentially electrochemical performance. This study introduces a novel, in-operando, CO₂-snow-assisted HSR™ process and benchmarks it against other prevalent surface cleaning methods post-fabrication, such as ultrasonic cleaning, on improving electrode stability and performance. Both qualitative and quantitative analyses indicate that all cleaning methods enhance electrode stability. However, ultrasonic cleaning was found to be more destructive compared to CO₂-snow-assisted HSR™ processing, resulting in reduced electrochemical performance. In contrast, in-operando CO₂-snow-assisted processing provided similar or superior improvements in surface stability, while preserving higher electrochemical performance in vitro and enabling a faster processing time. This study is the gateway to further assess the stability in vivo , which is the intended next step of the research.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Carbon DioxideElectrodes, ImplantedSurface PropertiesIridiumPlatinumMicroelectrodesElectrodesNeurons

Substanzen

Carbon DioxideIridiumPlatinum

Autor:innen und Institutionen

  • Department of Biomedical Engineering, University of Connecticut, Storrs, Connecticut, United States of America.
  • Pulse Technologies Inc. (An Integer Holdings Company), Research & Development, Quakertown, Pennsylvania, United States of America.
  • Tescan Orsay Holding, Libušina tř., Brno-Kohoutovice, Czechia.

ORCID-Profile: Alexander Blagojevic, Pouya Tavousi, Shahram Amini

Zitieren

APA

Blagojevic, A., Seche, W., Tavousi, P., Shahbazmohamadi, S., & Amini, S. (2026). On the stability of morphology and performance of neural interfacing electrodes fabricated via CO2-snow-assisted hierarchical surface restructuring. PLOS One, 21(7), e0349598. https://doi.org/10.1371/journal.pone.0349598

Vancouver

Blagojevic A, Seche W, Tavousi P, Shahbazmohamadi S, Amini S. On the stability of morphology and performance of neural interfacing electrodes fabricated via CO2-snow-assisted hierarchical surface restructuring. PLOS One. 2026;21(7):e0349598. doi:10.1371/journal.pone.0349598

BibTeX
@article{Blagojevic2026,
  author = {Blagojevic, Alexander and Seche, Wesley and Tavousi, Pouya and Shahbazmohamadi, Sina and Amini, Shahram},
  title = {On the stability of morphology and performance of neural interfacing electrodes fabricated via CO2-snow-assisted hierarchical surface restructuring},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {7},
  pages = {e0349598},
  doi = {10.1371/journal.pone.0349598}
}
Kostenlos starten →