EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic interfacial engineering of mesoporous magnetic metal oxide TiO2 nanocomposites for sustainable visible-light photocatalysis: Experimental insights and ML-based performance prediction

Safdar Abbas Kazmi, Muhammad Saqib Khan, Muhammad Bilal, Muhammad Arshad, Rizwana Sarwar, Nfor Elvis Nfor, Muhammad Faisal Javed, S Tasqeeruddin, Ajmal Khan, Ahson Jabbar Shaikh, Ahmed Al-Harrasi, Nadia Riaz iD

PLOS One · 02.06.2026 · 21 (6) · e0348881

DOI: 10.1371/journal.pone.0348881 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 02.06.2026. Verfasst von Safdar Abbas Kazmi und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Environmental Sciences, COMSATS University Islamabad, Abbottabad Campus, Abbottabad, Pakistan. Hauptthemen laut MEDLINE: Titanium, Nanocomposites, Light. Die Arbeit nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, King Khalid University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the structural, optical, morphological, magnetic, and photocatalytic properties of Fe 3 O 4 /TiO 2 nanocomposites (FeT NCs), synthesized through a modified sol-gel method for the photodegradation of Reactive Yellow 145 (RY145). Characterization of FeT NCs (PL, XRD, FTIR, VSM, DRUV-Vis, DLS, Zeta potential, XPS, BET, SEM, TEM, TGA) revealed that Fe 3 O 4 incorporation into TiO 2 enhances charge separation, suppresses electron–hole recombination through Ti–O–Fe linkages, and improves photocatalytic efficiency. The calcined 0.025FeT3 exhibited high crystallinity with dominant anatase TiO 2 and no rutile transition. SEM and TEM revealed a core–shell morphology with Fe 3 O 4 cores encapsulated by TiO 2 , while aggregation was minimized by synthesis conditions. Optimal photocatalytic performance (84.51% % RY145 removal at neutral pH) was achieved using 1 mg mL -1 0.025FeT3 following pseudo-first-order kinetics. The Langmuir–Hinshelwood model yielded rate and equilibrium constants of 2.80 mg.L -1 min -1 and 2.42 L mg -1 , respectively. Mechanistic and scavenging experiments indicated that photogenerated holes and •OH radicals dominated the degradation process. The FeT catalyst maintained high stability over six cycles. Magnetic measurements showed soft magnetic behavior with low coercivity and remanence, favoring easy recovery. The reduced bandgap (2.62 eV) facilitated visible-light activation, while BET analysis confirmed a mesoporous structure with high surface area. XPS verified the oxidation states of Fe and Ti, and HPLC confirmed RY145 decomposition via azo bond cleavage and oxidation to carboxylic acids, demonstrating efficient and sustainable photocatalytic activity. 0.025FeT3 demonstrated efficient, stable, and magnetically retrievable photocatalytic activity under visible light, highlighting its potential for sustainable treatment of textile wastewater. To optimize the batch experimental data, a novel ML-driven predictive framework was tested to model and map the relationships between the selected optimization parameters (FeT contents, FeT dose, reaction time), to predict RY145 photodegradation efficiency, and to identify the optimal operating window for improved photocatalytic performance (using three regression measures R 2 , MAE, and RMSE). The CNN models outperformed with a predicted accuracy and R 2 value of 0.91. Based on the results, ML-based evaluation outperformed manual optimization and traditional statistical methods, delivering a more efficient and reliable way for process optimization.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumNanocompositesLightCatalysisPorosityPhotolysisKineticsAzo Compounds

Substanzen

Titaniumtitanium dioxideAzo Compounds

Autor:innen und Institutionen

  • Department of Environmental Sciences, COMSATS University Islamabad, Abbottabad Campus, Abbottabad, Pakistan.
  • Department of Environmental Sciences, Institute of Environmental Science and Engineering, School of Civil and Environmental Engineering (SCEE), National University of Sciences and Technology, Islamabad, Pakistan.
  • Department of Chemistry, COMSATS University Islamabad, Abbottabad Campus, Abbottabad, Pakistan.
  • Department of Civil Engineering Ghulam Ishaq Khan Institute of Engineering Sciences and Technology, Topi, Swabi, KPK, Pakistan.
  • Department of Pharmaceutical Chemistry, College of Pharmacy, King Khalid University, Abha, Saudi Arabia.
  • Natural and Medical Sciences Research Center, University of Nizwa, Birkat Al Mauz, Nizwa, Sultanate of Oman.

ORCID-Profile: Nadia Riaz

Förderung

  • Deanship of Scientific Research, King Khalid University

Zitieren

APA

Kazmi, S. A., Khan, M. S., Bilal, M., Arshad, M., Sarwar, R., Nfor, N. E., Javed, M. F., Tasqeeruddin, S., Khan, A., Shaikh, A. J., Al-Harrasi, A., & Riaz, N. (2026). Synergistic interfacial engineering of mesoporous magnetic metal oxide TiO2 nanocomposites for sustainable visible-light photocatalysis: Experimental insights and ML-based performance prediction. PLOS One, 21(6), e0348881. https://doi.org/10.1371/journal.pone.0348881

Vancouver

Kazmi SA, Khan MS, Bilal M, Arshad M, Sarwar R, Nfor NE, et al. Synergistic interfacial engineering of mesoporous magnetic metal oxide TiO2 nanocomposites for sustainable visible-light photocatalysis: Experimental insights and ML-based performance prediction. PLOS One. 2026;21(6):e0348881. doi:10.1371/journal.pone.0348881

BibTeX
@article{Kazmi2026,
  author = {Kazmi, Safdar Abbas and Khan, Muhammad Saqib and Bilal, Muhammad and Arshad, Muhammad and Sarwar, Rizwana and Nfor, Nfor Elvis and Javed, Muhammad Faisal and Tasqeeruddin, S and Khan, Ajmal and Shaikh, Ahson Jabbar and Al-Harrasi, Ahmed and Riaz, Nadia},
  title = {Synergistic interfacial engineering of mesoporous magnetic metal oxide TiO2 nanocomposites for sustainable visible-light photocatalysis: Experimental insights and ML-based performance prediction},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {6},
  pages = {e0348881},
  doi = {10.1371/journal.pone.0348881}
}
Kostenlos starten →