EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the influence of the mass eccentric wheelset on the wheel polygonal wear of high-speed trains

Xiaonan Zhao, Songhua Zhao iD, Pingping He, Feng Yu

PLOS One · 11.05.2026 · 21 (5) · e0348499

DOI: 10.1371/journal.pone.0348499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 11.05.2026. Verfasst von Xiaonan Zhao und 3 weiteren Autor:innen. Beteiligte Einrichtung: Ningbo University of Technology, Ningbo, Zhejiang, China. Hauptthemen laut MEDLINE: Models, Theoretical. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Scientific Research Fund of Zhejiang Provincial Education Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the paper, the finite element model of the wheelset-track system is established, and the explicit transient dynamic analysis method is used to study the dynamic response. The research results show that when the mass eccentric wheelset rolls on the rails, the eccentric mass will increase the wheel-rail contact force, and the peak changes of the vertical contact force are more than those of the lateral force peak changes. As the speed increases, the mass eccentric wheelset will increase the vertical vibration energy of the wheelset-track system and make the vibration energy in the middle-high frequency range increase significantly. When the speed v = 300 km/h, the corresponding vibration frequency f = 534.82 Hz becomes very prominent, which is close to the passing frequency of high-order wheel polygonal wear. At the same time, with the increase of the dynamic unbalance U , the overall vibration energy of the wheelset-track system presents an increasing trend, but it has little effect on the main frequency of unstable vibration. Finally, the larger the eccentric phase difference of the wheelset mass, the more the main frequency of unstable vibration exists in the middle-high frequency region, which is easy to cause high-order wheel polygonal wear.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Models, TheoreticalVibrationFinite Element Analysis

Autor:innen und Institutionen

  • Ningbo University of Technology, Ningbo, Zhejiang, China.

ORCID-Profile: Songhua Zhao

Förderung

  • National Natural Science Foundation of China
  • Scientific Research Fund of Zhejiang Provincial Education Department

Zitieren

APA

Zhao, X., Zhao, S., He, P., & Yu, F. (2026). Study on the influence of the mass eccentric wheelset on the wheel polygonal wear of high-speed trains. PLOS One, 21(5), e0348499. https://doi.org/10.1371/journal.pone.0348499

Vancouver

Zhao X, Zhao S, He P, Yu F. Study on the influence of the mass eccentric wheelset on the wheel polygonal wear of high-speed trains. PLOS One. 2026;21(5):e0348499. doi:10.1371/journal.pone.0348499

BibTeX
@article{Zhao2026,
  author = {Zhao, Xiaonan and Zhao, Songhua and He, Pingping and Yu, Feng},
  title = {Study on the influence of the mass eccentric wheelset on the wheel polygonal wear of high-speed trains},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {5},
  pages = {e0348499},
  doi = {10.1371/journal.pone.0348499}
}
Kostenlos starten →