Microbial fuel cells for wastewater treatment and electricity production: A multi-platform simulation workflow
Mikrobielle Brennstoffzellen zur Abwasserbehandlung und Stromerzeugung: ein Multi-Plattform-Simulationsworkflow
PLOS One · 07.05.2026 · 21 (5) · e0348078
DOI: 10.1371/journal.pone.0348078 ↗Auf einen Blick
Eine MFC wurde per Simulation für Abwasserbehandlung und Stromerzeugung untersucht. Das Elektrodenmaterial hatte einen starken Einfluss auf die Spannung; Platin zeigte den höchsten Mittelwert.
Fragestellung
Wie lässt sich eine mikrobielle Brennstoffzelle für Abwasserbehandlung und Stromerzeugung per Multi-Plattform-Simulation bewerten?
Methode
Vier Softwareplattformen zur Modellierung von Wachstums-, Thermodynamik-, Konzentrations- und Statistikaspekten unter Modellannahmen.
Ergebnisse
Elektrodenmaterial beeinflusste die Spannung stark (F = 21779.35, p < 0.001, R² = 99.83 %). Platin erzeugte die höchste mittlere Spannung und unterschied sich statistisch von den anderen Materialien.
Schlussfolgerung der Autor:innen
Die Studie stellt einen reproduzierbaren Simulationsworkflow vor, der den Vergleich von Anodenmaterialien und Designkonfigurationen für MFCs unterstützt.
Kernaussagen
- MFC für Abwasserbehandlung und Stromerzeugung per Simulation untersucht
- Elektrodenmaterial mit starkem Einfluss auf die Spannung
- Platin zeigte die höchste mittlere Spannung
Deutsche Zusammenfassung: KI-gestützt aus dem Original-Abstract erstellt; alle Zahlen wurden automatisch mit dem Original abgeglichen. Maßgeblich ist der Original-Abstract.
Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 07.05.2026. Verfasst von Muhammad Ali. Beteiligte Einrichtung: Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia. Hauptthemen laut MEDLINE: Bioelectric Energy Sources, Wastewater, Electricity, Water Purification. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The need for sustainable energy generation and efficient wastewater treatment continues to motivate technologies that integrate energy recovery with environmental remediation. Here, a microbial fuel cell (MFC) system is designed and evaluated, leveraging electrogenic microorganisms to produce electricity during wastewater treatment, with a focus on material selection and design configuration. The proposed design integrates key elements including a proton exchange membrane, anodic and cathodic chambers, and an external circuit to support conversion of organic waste to electrical output through an anode–cathode redox cycle. Four software platforms were used to evaluate complementary aspects of the MFC system under stated modeling assumptions. MATLAB was used to model bacterial growth kinetics and anode performance using Butler–Volmer and Monod based relations. DWSIM was used for thermodynamic screening and mass and energy balance calculations to assess feasibility and stream behavior. COMSOL Multiphysics was used to interpret spatial concentration gradients and biofilm related distributions within the anode compartment. MINITAB was used for a design of experiments style statistical screening (ANOVA and Fisher post hoc testing) of five anode materials using a constructed voltage dataset guided by exploratory prototype observations, and electrode material showed a strong effect on voltage output (F = 21779.35, p < 0.001, R² = 99.83%), with platinum producing the highest mean voltage. Post hoc Fisher testing further indicated that the platinum electrode was statistically different from the other materials. Overall, the study establishes a reproducible simulation workflow that supports comparative screening of anode materials and design configurations for MFC based wastewater treatment with energy recovery.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia.
ORCID-Profile: Muhammad Ali
Zitieren
APA
Ali, M. (2026). Microbial fuel cells for wastewater treatment and electricity production: A multi-platform simulation workflow. PLOS One, 21(5), e0348078. https://doi.org/10.1371/journal.pone.0348078
Vancouver
Ali M. Microbial fuel cells for wastewater treatment and electricity production: A multi-platform simulation workflow. PLOS One. 2026;21(5):e0348078. doi:10.1371/journal.pone.0348078
BibTeX
@article{Ali2026,
author = {Ali, Muhammad},
title = {Microbial fuel cells for wastewater treatment and electricity production: A multi-platform simulation workflow},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {5},
pages = {e0348078},
doi = {10.1371/journal.pone.0348078}
}
EUVIMED