Numerical optimization of process parameters in HLLW spray calcination
PLOS One · 29.07.2026 · 21 (7) · e0347453
DOI: 10.1371/journal.pone.0347453 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 29.07.2026. Verfasst von Feng Gao und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing, China. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
To address the issues of incomplete reactions and potential solids accumulation in high‑level liquid waste (HLLW) spray calcination, this study developed a 3D computational domain utilizing a species transport model to simulate the combustion of a nitric acid, sucrose, and nitrate solution. The impacts of wall heating temperature (200–1200 °C), porous media porosity (0–1), inlet velocity (0.001–0.2 m/s), and reactant concentrations on the sodium oxide (Na 2 O) product mass fraction were systematically investigated. Simulation results demonstrate: (1) wall temperature positively correlates with Na 2 O formation, with the mass fraction rising from 0.089 to 0.360 as temperature increases from 200 °C to 1200 °C; (2) higher porosity facilitates product formation, though growth stagnates within the 0.2–0.8 range; (3) inlet velocity dictates reaction kinetics, peaking at an optimal 0.01 m/s (Na 2 O mass fraction 0.287), whereas velocities >0.05 m/s cause incomplete reactions; and (4) doubling sucrose concentration boosts Na 2 O yield by 115% and 180% more than equivalent increases in nitric acid and nitrates, respectively. Enhancing solid product recovery requires elevating wall temperature, regulating inlet velocity at approximately 0.01 m/s, and optimizing the sucrose reductant ratio.
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing, China.
- China Institute of Atomic Energy, Beijing, China.
ORCID-Profile: Yuzhou Ming
Förderung
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Gao, F., Ming, Y., Zhang, Y., Wang, B., & Jia, X. (2026). Numerical optimization of process parameters in HLLW spray calcination. PLOS One, 21(7), e0347453. https://doi.org/10.1371/journal.pone.0347453
Vancouver
Gao F, Ming Y, Zhang Y, Wang B, Jia X. Numerical optimization of process parameters in HLLW spray calcination. PLOS One. 2026;21(7):e0347453. doi:10.1371/journal.pone.0347453
BibTeX
@article{Gao2026,
author = {Gao, Feng and Ming, Yuzhou and Zhang, Yajun and Wang, Bochao and Jia, Xingyun},
title = {Numerical optimization of process parameters in HLLW spray calcination},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0347453},
doi = {10.1371/journal.pone.0347453}
}
EUVIMED