Integrated optimization of electroplating wastewater treatment: A comparative assessment of physicochemical treatment configurations and process enhancement using response surface methodology
PLOS One · 21.08.2026 · 21 (8) · e0345965
DOI: 10.1371/journal.pone.0345965 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift PLOS One, online erschienen am 21.08.2026. Verfasst von Soumaya Ibrahimi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Laboratory of Engineering Processes and Industrial Systems, National School of Engineering of Gabes, University o…. Hauptthemen laut MEDLINE: Electroplating, Wastewater, Water Purification. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University.
Abstract (Originalsprache)
This study assesses physicochemical treatment methods for industrial electroplating wastewater (EPW). Monitoring at a full-scale Tunisian facility revealed considerable instability in conventional systems. Residual nickel concentrations ranged from 0.02 ± 0.01 to 60 ± 0.4 mg/L. Chloride levels consistently exceeded regulatory thresholds, ranging from 442 ± 9–1418 ± 10 mg/L. Over 24 weeks, three treatment configurations were evaluated: ferric chloride-based coagulation (Configuration 1), polyaluminum chloride coagulation (Configuration 2), and lime slurry-based chemical attack (Configuration 3). Configuration 3 showed the most consistent performance. It achieved 99% chromium removal, 97% nickel removal, and 50% chloride reduction, while reducing chemical operating costs by 69% (0. 134 €· m ³ compared to 0. 432 €·m −3 ). A novel optimization strategy is presented that explicitly incorporates variability in influent nickel concentration ([Ni]ᵢ, 33–92 mg/L) as an independent factor. This is applied within a Response Surface Methodology–Central Composite Design, alongside pH (6.3–9.7) and flocculant dosage (2.2–9.4 mg/L). Fluctuations in wastewater composition are treated as a controlled design variable rather than experimental noise. This approach produces a robust predictive model ([Ni] f = f([Ni]ᵢ, pH, [A-PAM]) with high accuracy ( R ² = 0.9917). The resulting equation enables real- time adaptive chemical dosing. Operators can calculate optimal pH and flocculant requirements based on measured influent concentrations. Statistical analysis identified significant pH-metal loading interactions ( F = 5.70, p = 0.044). This confirms that optimal parameters systematically shift with influent composition. Under model-predicted conditions, residual nickel consistently remained below 2 mg/L, despite substantial influent variability. This ensures regulatory compliance. The integrated approach shows that variability- responsive optimization enhances treatment efficacy, operational stability, and economic efficiency.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Chemical Engineering, Laboratory of Engineering Processes and Industrial Systems, National School of Engineering of Gabes, University of Gabes, Gabes, Tunisia.
- College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, Saudi Arabia.
- University of Babylon, College of Education for Pure Sciences, Department of Physics, Babil, Iraq.
- Department of Chemical Engineering, College of Engineering, University of Ha'il, Ha'il, Saudi Arabia.
ORCID-Profile: Soumaya Ibrahimi, Aicha Gasmi, Karim Kriaa, Farid Fadhillah, Djamel Ghernaout, Noureddine Elboughdiri
Förderung
- Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University
Zitieren
APA
Ibrahimi, S., Gasmi, A., Kriaa, K., Fadhillah, F., Habeeb, M. A., Ghernaout, D., Elboughdiri, N., & Hannachi, A. (2026). Integrated optimization of electroplating wastewater treatment: A comparative assessment of physicochemical treatment configurations and process enhancement using response surface methodology. PLOS One, 21(8), e0345965. https://doi.org/10.1371/journal.pone.0345965
Vancouver
Ibrahimi S, Gasmi A, Kriaa K, Fadhillah F, Habeeb MA, Ghernaout D, et al. Integrated optimization of electroplating wastewater treatment: A comparative assessment of physicochemical treatment configurations and process enhancement using response surface methodology. PLOS One. 2026;21(8):e0345965. doi:10.1371/journal.pone.0345965
BibTeX
@article{Ibrahimi2026,
author = {Ibrahimi, Soumaya and Gasmi, Aicha and Kriaa, Karim and Fadhillah, Farid and Habeeb, Majeed Ali and Ghernaout, Djamel and Elboughdiri, Noureddine and Hannachi, Ahmed},
title = {Integrated optimization of electroplating wastewater treatment: A comparative assessment of physicochemical treatment configurations and process enhancement using response surface methodology},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {8},
pages = {e0345965},
doi = {10.1371/journal.pone.0345965}
}
EUVIMED