Acid-activated chitosan-modified Iranian bentonite for adsorption of Cu(II) and Zn(II) from water; A green and sustainable water treatment approach
PLOS One · 30.07.2026 · 21 (7) · e0344207
DOI: 10.1371/journal.pone.0344207 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 30.07.2026. Verfasst von Sam Daftari und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Geology, La.C., Islamic Azad University, Lahijan, Iran. Hauptthemen laut MEDLINE: Bentonite, Chitosan, Zinc, Copper. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates the adsorption performance of an Iranian bentonite modified through two routes: activation with HNO 3 followed by calcination at 500 °C yielding NWF adsorbent and activation with HCl followed by chitosan intercalation to obtain HWF adsorbent. Batch experiments assessed Cu 2+ and Zn 2+ removal from aqueous solutions under varying pH, contact time (5–45 min), sorbent dosage (10–150 mg), initial concentration (20–200 mg/L), and temperatures (20–45°C). Atomic Absorption Spectroscopy was used to evaluate heavy metal concentrations. Nonlinear isotherm fitting showed that the Langmuir model described the data well with high mass normalized capacities under the low-dose condition. Freundlich fits indicated favorable adsorption on heterogeneous surfaces. Kinetics followed the pseudo-second-order model (R² = 0.996–0.998), could be described by chemisorption and in case of NWF, faster uptake (higher k 2 ) achieved. Optimal adsorption performance occurred at a pH of approximately 6–7, achieving equilibrium capacities ( q e ) as high as 99.0 mg/g and blank tests at pH ≥ 8 minimized contributions from metal hydroxide precipitation. Thermodynamic analysis has been carried out to confirm spontaneous and endothermic adsorption in temptatures ranged from 20–45°C. X-ray Diffraction, Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy corroborated successful modification and enhanced site accessibility. The results of this study showed that acid-activated and chitosan-modified bentonites are low-cost, effective, and sustainable sorbents for Cu 2+ and Zn 2+ removal from water, with practical relevance to wastewater treatment.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Geology, La.C., Islamic Azad University, Lahijan, Iran.
ORCID-Profile: Sam Daftari, Mojgan Salavati
Zitieren
APA
Daftari, S., Salavati, M., & Chamchali, M. M. (2026). Acid-activated chitosan-modified Iranian bentonite for adsorption of Cu(II) and Zn(II) from water; A green and sustainable water treatment approach. PLOS One, 21(7), e0344207. https://doi.org/10.1371/journal.pone.0344207
Vancouver
Daftari S, Salavati M, Chamchali MM. Acid-activated chitosan-modified Iranian bentonite for adsorption of Cu(II) and Zn(II) from water; A green and sustainable water treatment approach. PLOS One. 2026;21(7):e0344207. doi:10.1371/journal.pone.0344207
BibTeX
@article{Daftari2026,
author = {Daftari, Sam and Salavati, Mojgan and Chamchali, Manoochehr Mortazavi},
title = {Acid-activated chitosan-modified Iranian bentonite for adsorption of Cu(II) and Zn(II) from water; A green and sustainable water treatment approach},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0344207},
doi = {10.1371/journal.pone.0344207}
}
EUVIMED