EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on mechanical properties and microstructure of soil-cement solidified recycled aggregate concrete using bridge demolition waste

Yang Du, Ziqing Cheng, Peichen Cai iD, Ke Lou, Shaodong Wei, Xiaoyu Wang, Shengjie Wang, Xuesong Mao, Feiheng Huang, Qian Wu

PLOS One · 16.03.2026 · 21 (3) · e0343109

DOI: 10.1371/journal.pone.0343109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 16.03.2026. Verfasst von Yang Du und 9 weiteren Autor:innen. Beteiligte Einrichtung: Shandong Expressway Construction Management Group Co., Ltd., Jinan, China. Hauptthemen laut MEDLINE: Construction Materials, Mechanical Phenomena. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong High-Speed Construction Management Group Co., LTD. Unveiled the Science and Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical behavior and microstructural characteristics of recycled aggregate concrete (RAC) solidified with soil cement, using high-quality recycled aggregates derived from demolished reinforced-concrete bridges. Concrete mixtures were prepared with varying recycled aggregate replacement ratios (60%, 80%, 100%) and soil-cement contents (15%, 18%, 21%). Compressive strength (CS) tests and scanning electron microscopy (SEM) analyses were conducted. Owing to the dense and high-strength nature of bridge-demolition aggregates, increasing the recycled aggregate replacement ratio from 60% to 100% led to a noticeable improvement in compressive strength—an outcome that contrasts with most studies using lower-grade construction waste. The results showed that increasing the soil-cement content raised the 28-day CS to a maximum of 21 MPa. The 7-day CS exceeding 70% of the 28-day value, indicating rapid early strength development. Compared with conventional concrete, the RAC incorporating bridge-derived aggregates demonstrated enhanced crack resistance and a denser microstructure. A regression model relating mix parameters and curing age to CS achieved coefficients of determination exceeding R 2 = 0.99, demonstrating its strong predictive capability. SEM observations showed progressive pore refinement and matrix densification during curing, consistent with the measured strength gains. These findings support the engineering application of RAC and promote the sustainable reuse of construction waste in infrastructure projects.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsMechanical PhenomenaMaterials TestingRecyclingMicroscopy, Electron, Scanning

Autor:innen und Institutionen

  • Shandong Expressway Construction Management Group Co., Ltd., Jinan, China.
  • Shandong Expressway Yanpeng Highway Co., Ltd., Yantai, China.
  • College of Highway, Chang'an University, Xi'an, China.

ORCID-Profile: Peichen Cai

Förderung

  • Shandong High-Speed Construction Management Group Co., LTD. Unveiled the Science and Technology Project

Zitieren

APA

Du, Y., Cheng, Z., Cai, P., Lou, K., Wei, S., Wang, X., Wang, S., Mao, X., Huang, F., & Wu, Q. (2026). Study on mechanical properties and microstructure of soil-cement solidified recycled aggregate concrete using bridge demolition waste. PLOS One, 21(3), e0343109. https://doi.org/10.1371/journal.pone.0343109

Vancouver

Du Y, Cheng Z, Cai P, Lou K, Wei S, Wang X, et al. Study on mechanical properties and microstructure of soil-cement solidified recycled aggregate concrete using bridge demolition waste. PLOS One. 2026;21(3):e0343109. doi:10.1371/journal.pone.0343109

BibTeX
@article{Du2026,
  author = {Du, Yang and Cheng, Ziqing and Cai, Peichen and Lou, Ke and Wei, Shaodong and Wang, Xiaoyu and Wang, Shengjie and Mao, Xuesong and Huang, Feiheng and Wu, Qian},
  title = {Study on mechanical properties and microstructure of soil-cement solidified recycled aggregate concrete using bridge demolition waste},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {3},
  pages = {e0343109},
  doi = {10.1371/journal.pone.0343109}
}
Kostenlos starten →