Hybrid passive micromixer using combined traditional microfabrication and 3D printing for gold nanoparticle synthesis
PLOS One · 18.02.2026 · 21 (2) · e0342823
DOI: 10.1371/journal.pone.0342823 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 18.02.2026. Verfasst von Yasser Aldaghestani und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Nuclear Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates. Hauptthemen laut MEDLINE: Gold, Printing, Three-Dimensional, Metal Nanoparticles, Microtechnology. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study introduces a novel hybrid passive micromixer that seamlessly integrates conventional microfabrication techniques with cost-effective 3D printing to facilitate the controlled synthesis of nanoparticles with high precision in size and morphology. The micromixer design combines a Y-junction microchannel fabricated using soft lithography with an embedded 3D-printed helical structure to enhance mixing efficiency. Notably, the helical structure was fabricated using a commercially available, cost-effective Digital Light Processing (DLP) 3D printer, demonstrating that high-performance microfluidic devices can be manufactured without reliance on expensive, specialized equipment. Numerical simulations were conducted to analyze the micromixer parametrically and to compare its performance to various micromixer designs reported in the literature. The results reveal the superiority of the mixing capabilities of the proposed mixer under laminar flow conditions. Experimental validation using dyed fluids and image analysis techniques confirmed the enhanced mixing performance of the hybrid micromixer, reaching a mixing efficiency of 92% at a Reynolds number of 1, with results closely matching the numerical predictions. The device was then used in the synthesis of gold nanoparticles, employing L-ascorbic acid as the reducing agent. Characterization of the synthesized nanoparticles via UV-Vis spectroscopy and scanning electron microscopy (SEM) demonstrated precise control over particle size and distribution, with gold nanoparticles ranging from 14 to 25 nm at a total flow rate of 5000 µL/min. This hybrid micromixer approach offers a scalable, efficient, and accessible platform for nanomaterial synthesis, with potential applications in fields such as drug delivery, biosensing, and catalysis.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Mechanical and Nuclear Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates.
- System on Chip Lab, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates.
- Advanced Research and Innovation Center (ARIC), Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates.
ORCID-Profile: Anas Alazzam
Zitieren
APA
Aldaghestani, Y., Schiffer, A., & Alazzam, A. (2026). Hybrid passive micromixer using combined traditional microfabrication and 3D printing for gold nanoparticle synthesis. PLOS One, 21(2), e0342823. https://doi.org/10.1371/journal.pone.0342823
Vancouver
Aldaghestani Y, Schiffer A, Alazzam A. Hybrid passive micromixer using combined traditional microfabrication and 3D printing for gold nanoparticle synthesis. PLOS One. 2026;21(2):e0342823. doi:10.1371/journal.pone.0342823
BibTeX
@article{Aldaghestani2026,
author = {Aldaghestani, Yasser and Schiffer, Andreas and Alazzam, Anas},
title = {Hybrid passive micromixer using combined traditional microfabrication and 3D printing for gold nanoparticle synthesis},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {2},
pages = {e0342823},
doi = {10.1371/journal.pone.0342823}
}
EUVIMED