EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Micromachined mmWave 28.0/38.0 GHz MIMO antenna loaded with frequency selective surface for gain enhancement and SAR analysis for future wireless applications

Manish Sharma, Bhaskara Rao Perli, Geetanjali Singla iD, Tathababu Addepalli, Sivasubramanyam Medasani, B Satya Sridevi, Tanweer Ali iD

PLOS One · 2026

DOI: 10.1371/journal.pone.0342022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Manish Sharma und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical, Electronics and Communication Engineering, Galgotias University, Greater Noida, Uttar Pradesh, India. Hauptthemen laut MEDLINE: Wireless Technology, Microtechnology. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The presented work describes the four-port multiple-input multiple-output (MIMO) antenna designed on Rogers substrate with a thickness of 0.787 mm. The core of the MIMO antenna includes a hexagonal-patch etched by a rectangular slot and an etched hexagonal-ring in full-ground, which are printed on opposite surfaces, generating measured millimeter-wave (mmWave) bandwidth of 26.45 GHz-29.27 GHz and 37.04 GHz-39.12 GHz. The dielectric material is micromachined, and the four-port radiating elements maintain isolation of more than 20.0 dB with an overall size of 17.0 mm × 22.0 mm × 0.787 mm. The novel 11 × 11 hexagonal-ring frequency-selective-surface (FSS) is placed below the MIMO antenna, enhancing the peak-gain by 5.16 dBi with a size of 42.50 mm × 42.50 mm printed on Rogers5880 0.787 mm thickness. The MIMO antenna also features good diversity-performance with ECC mmWave-FSS < 0.18, DG mmWave-FSS > 9.995 dB, TARC mmWave-FSS < −4.76 dB, and CCL mmWave-FSS < 0.30 b/s/Hz. The cumulative features with dual millimeter wave bands, enhanced peak-realized gain, suppressed back-lobe radiations, and good diversity performance make the proposed MIMO antenna loaded with FSS suitable for 5G, satellite-communication, IoT, and smart cities applications. The MIMO antenna loaded with FSS is also subjected for SAR analysis for input power of 50 mW and 500 mW.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Wireless TechnologyMicrotechnologyEquipment DesignMicrowaves

Autor:innen und Institutionen

  • Department of Electrical, Electronics and Communication Engineering, Galgotias University, Greater Noida, Uttar Pradesh, India.
  • Department of ECE, St. Ann's College of Engineering and Technology, Chirala, India.
  • Department of Electronics and Communication Engineering, Thapar Institute of Engineering and Technology, Patiala, Punjab, India.
  • Department of ECE, Aditya University, Surampalem, India.
  • Department of CSE, K. S. School of Engineering and Management, Bengaluru, India.
  • Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India.

ORCID-Profile: Geetanjali Singla, Tanweer Ali

Zitieren

APA

Sharma, M., Perli, B. R., Singla, G., Addepalli, T., Medasani, S., Sridevi, B. S., & Ali, T. (2026). Micromachined mmWave 28.0/38.0 GHz MIMO antenna loaded with frequency selective surface for gain enhancement and SAR analysis for future wireless applications. PLOS One. https://doi.org/10.1371/journal.pone.0342022

Vancouver

Sharma M, Perli BR, Singla G, Addepalli T, Medasani S, Sridevi BS, et al. Micromachined mmWave 28.0/38.0 GHz MIMO antenna loaded with frequency selective surface for gain enhancement and SAR analysis for future wireless applications. PLOS One. 2026. doi:10.1371/journal.pone.0342022

BibTeX
@article{Sharma2026,
  author = {Sharma, Manish and Perli, Bhaskara Rao and Singla, Geetanjali and Addepalli, Tathababu and Medasani, Sivasubramanyam and Sridevi, B Satya and Ali, Tanweer},
  title = {Micromachined mmWave 28.0/38.0 GHz MIMO antenna loaded with frequency selective surface for gain enhancement and SAR analysis for future wireless applications},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0342022}
}
Kostenlos starten →