EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Resilient modulus characteristics and model prediction of cement phosphogypsum under dry-wet cycling conditions

Wengang Gan, Kaisheng Chen iD, Jinxiong Chen, Yu'ang Chen, Shuang Deng

PLOS One · 2026

DOI: 10.1371/journal.pone.0341539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Wengang Gan und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Guizhou University, Guiyang, China. Hauptthemen laut MEDLINE: Construction Materials. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guiyang Municipal Science and Technology Programme, Guizhou Provincial Basic Research Programme (Natural Science) for Youth Guidance, High-level Innovative Talents in Guizhou Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The subgrade resilient modulus is a crucial parameter in pavement structure design, directly related to the safety and economy of the pavement structure. Currently, the subgrade resilient modulus used in pavement structure design is the static resilient modulus. To address this issue, this paper employs dynamic triaxial tests to analyze the effects of confining stress ( σ 3 ), cyclic dynamic stress ( σ d ), wet-dry cycles (N), and cement dosage (C) on the resilient modulus (M R ). It explores the relationship among the M R , static resilient modulus, and 7-day unconfined compressive strength ( σ c ), and proposes a predictive model for M R considering C and N. SEM and XRD methods are used to analyze the mechanism of the effect of wet-dry cycles on M R at the microstructural level. The results show that; (1) The M R of the PG mixture increases with the rise of σ 3 and decreases with the increase of σ d , is positively correlated with C, and negatively correlated with the number of N, with the decay of M R mainly concentrated in the first four wet-dry cycles and gradually stabilizing afterwards, which is explained through SEM and XRD analysis. (2) By comparing M R and the static resilient modulus, it is found that the M R of PG specimens under wet-dry cycles is 1.25–1.30 times that of the static resilient modulus, this ratio can be used to make a preliminary estimation of the M R of C-stabilized PG materials. (3) The model relating σ c and M R follows a linear relationship, with correlation coefficients for the fit all exceeding 0.94, indicating a good fit. (4) A model for predicting M R that incorporates N and C was proposed, and the reliability of this model was verified by comparing predicted values with experimental data. The predicted M R provides a reliable basis for pavement design and holds significant engineering value.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsCompressive StrengthMaterials TestingStress, MechanicalElastic Modulus

Autor:innen und Institutionen

  • College of Civil Engineering, Guizhou University, Guiyang, China.
  • School of Civil Engineering, Southwest Jiaotong University, Chengdu, China.
  • School of Architectural Engineering, Kaili University, Kaili, Guizhou, China.

ORCID-Profile: Kaisheng Chen

Förderung

  • Guiyang Municipal Science and Technology Programme
  • Guizhou Provincial Basic Research Programme (Natural Science) for Youth Guidance
  • High-level Innovative Talents in Guizhou Province
  • Guizhou Provincial Science and Technology Programme

Zitieren

APA

Gan, W., Chen, K., Chen, J., Chen, Y., & Deng, S. (2026). Resilient modulus characteristics and model prediction of cement phosphogypsum under dry-wet cycling conditions. PLOS One. https://doi.org/10.1371/journal.pone.0341539

Vancouver

Gan W, Chen K, Chen J, Chen Y, Deng S. Resilient modulus characteristics and model prediction of cement phosphogypsum under dry-wet cycling conditions. PLOS One. 2026. doi:10.1371/journal.pone.0341539

BibTeX
@article{Gan2026,
  author = {Gan, Wengang and Chen, Kaisheng and Chen, Jinxiong and Chen, Yu'ang and Deng, Shuang},
  title = {Resilient modulus characteristics and model prediction of cement phosphogypsum under dry-wet cycling conditions},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0341539}
}
Kostenlos starten →