Integrated UAV photogrammetry and SMRM constitutive modeling for spatial stability assessment of layered rock slopes
PLOS One · 30.04.2026 · 21 (4) · e0341174
DOI: 10.1371/journal.pone.0341174 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 30.04.2026. Verfasst von Huagang Shan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Shaoxing Kezhu Expressway Co., Ltd., Shaoxing, China. Hauptthemen laut MEDLINE: Photogrammetry, Unmanned Aerial Devices, Models, Theoretical. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Transportation of Zhejiang Province.
Abstract (Originalsprache)
Layered rock slopes with structural discontinuities pose significant challenges for stability assessment under complex geological conditions. This study presents an integrated approach combining unmanned aerial vehicle (UAV) photogrammetry, 3D numerical modeling, and the Statistical Mechanics of Rock Masses (SMRM) constitutive model to evaluate slope stability. Focusing on a layered tuffaceous sandstone slope in Shaoxing, China, UAV-derived point cloud data were processed via CloudCompare and Rhino software to generate a high-resolution 3D geological model. The CC-Griddle-Flac3D workflow enabled efficient meshing and integration with Flac3D for numerical analysis. The SMRM model was implemented to quantify anisotropic deformation, stress distribution, rock mass quality, and failure probability. Results demonstrated that the proposed modeling framework effectively captured slope deformation trends and stress heterogeneity, The direction of the structural plane is highly consistent (24 ° simulated vs. 23 ° observed), which indicates that the SMRM constitutive model shows high accuracy in characterizing the anisotropic properties of materials. The SMRM-based stability metrics revealed localized weak zones (Grade IV rock mass) with elevated reinforcement demands (Δσ₃ = 0.0126 MPa) and failure probabilities (60%), while maintaining an overall stability coefficient of 2.0. This method enhances the spatial visualization of rock mass parameters, enabling targeted reinforcement strategies. The study provides a validated technical pathway for rapid slope stability evaluation in geologically complex regions, supporting data-driven disaster prevention decisions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Shaoxing Kezhu Expressway Co., Ltd., Shaoxing, China.
- Facuty of Civil Engineering, Shaoxing University, Shaoxing, China.
- Zhejiang Rock Innovation Technology Co., Ltd., Shaoxing, China.
- Zhejiang Digital Transport Institute Technology Co., Ltd., Shaoxing, China.
ORCID-Profile: Jie Wu
Förderung
- Department of Transportation of Zhejiang Province
Zitieren
APA
Shan, H., Wang, Z., Wu, J., Wang, W., Lu, J., Wu, F., & Li, Z. (2026). Integrated UAV photogrammetry and SMRM constitutive modeling for spatial stability assessment of layered rock slopes. PLOS One, 21(4), e0341174. https://doi.org/10.1371/journal.pone.0341174
Vancouver
Shan H, Wang Z, Wu J, Wang W, Lu J, Wu F, et al. Integrated UAV photogrammetry and SMRM constitutive modeling for spatial stability assessment of layered rock slopes. PLOS One. 2026;21(4):e0341174. doi:10.1371/journal.pone.0341174
BibTeX
@article{Shan2026,
author = {Shan, Huagang and Wang, Zhongliang and Wu, Jie and Wang, Weiguo and Lu, Jianyang and Wu, Faquan and Li, Zhenghua},
title = {Integrated UAV photogrammetry and SMRM constitutive modeling for spatial stability assessment of layered rock slopes},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {4},
pages = {e0341174},
doi = {10.1371/journal.pone.0341174}
}
EUVIMED