EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synergistic anti-icing and snow-melting performance of two-component road markings enabled by PCMs and slow-release salts

Wei Zhang, Kaibo Yang iD, Renshan Chen iD, Chong Wang, Xusheng Wei

PLOS One · 02.02.2026 · 21 (2) · e0341054

DOI: 10.1371/journal.pone.0341054 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 02.02.2026. Verfasst von Wei Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Traffic Civil Engineering, Shandong Jiaotong University, Jinan, Shandong, China. Hauptthemen laut MEDLINE: Snow. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional road marking coatings suffer significant performance deterioration under winter conditions, including frost coverage, reduced retroreflectivity, and low-temperature embrittlement. This study presents a functional two-component road marking coating incorporating a composite anti-icing additive composed of a temperature-regulating phase-change material (TH-ME5) and a salt-based slow-release agent (T-SEN). The influence of additive content and the TH-ME5/T-SEN ratio on coating properties, road performance, and ice/snow mitigation was systematically evaluated. Results show that a total additive content of ≤20 wt.% maintains compliance with standard requirements for adhesion, flexibility, wear resistance, drying time, retroreflectivity, hiding power, alkali resistance, and UV aging. Ice adhesion tests reveal a two-stage anti-icing mechanism: TH-ME5 provides latent heat buffering during early freezing, while T-SEN governs long-term deicing. The optimal formulation—20 wt.% additive with a TH-ME5:T-SEN ratio of 1:3—achieved the lowest relative ice adhesion. Snow-melting simulations further demonstrate the coating’s ability to delay ice formation and reduce surface snow accumulation. This PCM–salt synergistic approach provides a feasible and scalable strategy for durable, self-deicing pavement markings in cold regions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SnowSaltsIceFreezing

Substanzen

SaltsIce

Autor:innen und Institutionen

  • School of Traffic Civil Engineering, Shandong Jiaotong University, Jinan, Shandong, China.
  • School of Transportation and Logistics Engineering, Shandong Jiaotong University, Jinan, Shandong, China.

ORCID-Profile: Kaibo Yang, Renshan Chen

Zitieren

APA

Zhang, W., Yang, K., Chen, R., Wang, C., & Wei, X. (2026). Synergistic anti-icing and snow-melting performance of two-component road markings enabled by PCMs and slow-release salts. PLOS One, 21(2), e0341054. https://doi.org/10.1371/journal.pone.0341054

Vancouver

Zhang W, Yang K, Chen R, Wang C, Wei X. Synergistic anti-icing and snow-melting performance of two-component road markings enabled by PCMs and slow-release salts. PLOS One. 2026;21(2):e0341054. doi:10.1371/journal.pone.0341054

BibTeX
@article{Zhang2026,
  author = {Zhang, Wei and Yang, Kaibo and Chen, Renshan and Wang, Chong and Wei, Xusheng},
  title = {Synergistic anti-icing and snow-melting performance of two-component road markings enabled by PCMs and slow-release salts},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {2},
  pages = {e0341054},
  doi = {10.1371/journal.pone.0341054}
}
Kostenlos starten →