Process optimization of microwave drying for rice based on response surface methodology
PLOS One · 2026
DOI: 10.1371/journal.pone.0340356 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Chunshan Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Jiamusi University, Jiamusi, China. Hauptthemen laut MEDLINE: Oryza, Microwaves, Desiccation. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Academy of National Food and Strategic Reserves Ad-ministration, Natural Science Foundation Joint Guidance Project of Heilongjiang Province, National Fund Cultivation Project of Jiamusi University.
Abstract (Originalsprache)
To optimize the microwave drying process of paddy rice and improve its quality, the effects of hot air temperature, microwave power, and grain layer thickness on the post-drying potassium content, calcium content, vitamin B₁ content, and free fatty acid content of rice were investigated. Using response surface methodology, an experimental scheme based on the Box-Behnken design was constructed to analyze the influence of these three factors on the four nutritional and biochemical indicators. A multi-index optimization model was established and validated. The results showed that all response indicator models were statistically significant. The optimal process parameters were determined as follows: hot air temperature of 52.47°C, microwave power of 20 kW, and grain layer thickness of 2.78 cm. The corresponding predicted values were potassium content of 3724 mg/kg, calcium content of 113.7 mg/kg, vitamin B₁ content of 0.290 mg/100g, and free fatty acid content of 21.5 mg/100g. Validation experiments demonstrated that the dried rice under these conditions exhibited excellent quality, with relative errors between predicted and measured values below 3%, indicating the reliability of the model and the significant improvement in rice drying quality achieved by the optimized process. Furthermore, visual process reference charts were developed to provide a theoretical basis for adjusting process parameters in practical production.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- College of Mechanical Engineering, Jiamusi University, Jiamusi, China.
- Academy of National Food and Strategic Reserves Administration, Institute of Grain Storage and Logistics, Beijing, China.
- National Engineering Research Center of Grain Storage and Logistics, Beijing, China.
- Jiangsu Macrowave Microwave Technology Co., Ltd, Suzhou, China.
ORCID-Profile: Kezhen Chang, Yi Jin
Förderung
- Academy of National Food and Strategic Reserves Ad-ministration
- Natural Science Foundation Joint Guidance Project of Heilongjiang Province
- National Fund Cultivation Project of Jiamusi University
Zitieren
APA
Liu, C., Chang, K., Li, J., Li, J., Chen, S., Jin, Y., Zhang, Z., & Tang, Z. (2026). Process optimization of microwave drying for rice based on response surface methodology. PLOS One. https://doi.org/10.1371/journal.pone.0340356
Vancouver
Liu C, Chang K, Li J, Li J, Chen S, Jin Y, et al. Process optimization of microwave drying for rice based on response surface methodology. PLOS One. 2026. doi:10.1371/journal.pone.0340356
BibTeX
@article{Liu2026,
author = {Liu, Chunshan and Chang, Kezhen and Li, Jie and Li, Jinquan and Chen, Siyu and Jin, Yi and Zhang, Zhongjie and Tang, Zhigao},
title = {Process optimization of microwave drying for rice based on response surface methodology},
journal = {PLOS One},
year = {2026},
doi = {10.1371/journal.pone.0340356}
}
EUVIMED