Design and optimization of a butterfly-shaped grafting clip and cutting mechanism based on finite element simulation
PLOS One · 2026
DOI: 10.1371/journal.pone.0339854 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Qiangwen Su und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi, Xinjiang, China. Hauptthemen laut MEDLINE: Finite Element Analysis. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Technologies Research and Development Program, Directorate-General for Agriculture and Rural Development.
Abstract (Originalsprache)
To improve the reliability and cost-efficiency of the grafting mechanism, this study proposes a novel butterfly-shaped polyethylene (PE) grafting clip and integrated cutting-type clip-feeding mechanism. The proposed system replaces traditional steel coil clips and vibration screen feeders with a lightweight, low-damage, and low-cost design capable of continuous clip feeding. The mechanical behavior of the PE clip material was characterized through tensile testing and modeled using the Johnson-Cook constitutive equation. A finite element model of the cutting process was established in Abaqus to investigate the effects of cutting force, speed, and angle on blade stress and clip deformation. Using the Box-Behnken response surface methodology, the cutting parameters were optimized to minimize stress concentration and material distortion. Simulation results showed that optimal performance was achieved at a cutting force of 110 N, a speed of 25.618 cm/s, and a cutting angle of 32.414 ° , yielding a maximum blade stress of 1.31 MPa and clip strain of 5.304%. Validation tests demonstrated that a 30 ° cutting angle produced the highest cutting quality, consistent with simulation predictions. Comparative performance evaluations with a commercial vibrating screen clip feeder confirmed the superiority of the proposed system in terms of reliability, energy efficiency, operational noise, and cost. The developed mechanism offers a compact and practical solution for automated grafting, particularly suitable for small and medium-sized seedling nurseries seeking affordable mechanization technologies.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- College of Mechanical and Electrical Engineering, Xinjiang Agricultural University, Urumqi, Xinjiang, China.
- Agricultural Equipment Research Institute, Xinjiang Academy of Agricultural Sciences, Urumqi, Xinjiang, China.
- Xinjiang Key Laboratory of Intelligent Control Technology for Facility Agriculture, Urumqi, Xinjiang, China.
ORCID-Profile: Xinwei Cao, Huifeng Shi
Förderung
- Key Technologies Research and Development Program
- Directorate-General for Agriculture and Rural Development
Zitieren
APA
Su, Q., Wu, L., Yue, Q., Gao, X., Cao, X., & Shi, H. (2026). Design and optimization of a butterfly-shaped grafting clip and cutting mechanism based on finite element simulation. PLOS One. https://doi.org/10.1371/journal.pone.0339854
Vancouver
Su Q, Wu L, Yue Q, Gao X, Cao X, Shi H. Design and optimization of a butterfly-shaped grafting clip and cutting mechanism based on finite element simulation. PLOS One. 2026. doi:10.1371/journal.pone.0339854
BibTeX
@article{Su2026,
author = {Su, Qiangwen and Wu, Letian and Yue, Qiuxing and Gao, Xingdong and Cao, Xinwei and Shi, Huifeng},
title = {Design and optimization of a butterfly-shaped grafting clip and cutting mechanism based on finite element simulation},
journal = {PLOS One},
year = {2026},
doi = {10.1371/journal.pone.0339854}
}
EUVIMED