EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Parameter sensitivity analysis and structural optimization of PLC construction method pile cofferdam based on RSM

Zhongchu Tian, Ye Dai iD, Shiyao Wang, Wei Zhang

PLOS One · 2025

DOI: 10.1371/journal.pone.0339267 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Zhongchu Tian und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering, Changsha University of Science & Technology, Changsha, Hunan, China. Hauptthemen laut MEDLINE: Construction Materials, Construction Industry, Models, Theoretical. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Nature Science Foundation of China, The Hunan Natural Science Foundation of China, The Key Research and Development Project of Ningxia Hui Autonomous Region.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To explore the influence patterns of various structural parameters of the PLC construction method pile cofferdam on its mechanical properties, and to optimize the structural design for enhancing engineering safety and economy, this study relied on the PLC construction method pile cofferdam of the Luoxizhou Super Bridge. Multiple sensitivity analysis methods were employed to identify sensitive parameters. Subsequently, a multi-objective optimization study was conducted based on the identified sensitive parameters. Additionally, the entropy weight TOPSIS decision-making approach was introduced to quantify the advantages and disadvantages of each optimized scheme and the initial design scheme. The results indicate that: (1) Sensitivity rankings derived from the single parameter method and the response surface methodology are consistent across parameters, but the response surface methodology provides more accurate sensitivity quantification. (2) The thicknesses of the steel sheet pile wall, steel pipe pile wall, and bottom-sealing concrete significantly affect the maximum displacement and maximum stress of the cofferdam. (3) The entropy-weighted TOPSIS decision-making can effectively evaluate the advantages and disadvantages of the Pareto solution set optimized by the NSGA-II algorithm. (4) Economic cost and structural performance exhibit a nonlinear synergy: As cost increases, the maximum displacement of the cofferdam decreases markedly, whereas the maximum stress of the bottom-sealing concrete decreases at a slower rate.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsConstruction IndustryModels, TheoreticalAlgorithmsSteel

Substanzen

Steel

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering, Changsha University of Science & Technology, Changsha, Hunan, China.
  • School of Civil Engineering, Fujian University of Technology, Fuzhou, Fujian, China.
  • Nanning Branch of China ANENG Group First Engineering Co., Ltd., Nanning, Guangxi, China.

ORCID-Profile: Ye Dai

Förderung

  • The National Nature Science Foundation of China
  • The Hunan Natural Science Foundation of China
  • The Key Research and Development Project of Ningxia Hui Autonomous Region
  • Jiangxi Provincial Department of Transport Science and Technology Project

Zitieren

APA

Tian, Z., Dai, Y., Wang, S., & Zhang, W. (2025). Parameter sensitivity analysis and structural optimization of PLC construction method pile cofferdam based on RSM. PLOS One. https://doi.org/10.1371/journal.pone.0339267

Vancouver

Tian Z, Dai Y, Wang S, Zhang W. Parameter sensitivity analysis and structural optimization of PLC construction method pile cofferdam based on RSM. PLOS One. 2025. doi:10.1371/journal.pone.0339267

BibTeX
@article{Tian2025,
  author = {Tian, Zhongchu and Dai, Ye and Wang, Shiyao and Zhang, Wei},
  title = {Parameter sensitivity analysis and structural optimization of PLC construction method pile cofferdam based on RSM},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0339267}
}
Kostenlos starten →