EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of luting materials and root third on glass fiber posts bonding strength after hydrothermal aging

Suellen Tayenne Pedrosa Pinto iD, Carlos Rangel de Moura Oliveira, Mário Tanomaru-Filho, José Maurício Dos Santos Nunes Reis iD

PLOS One · 2026

DOI: 10.1371/journal.pone.0339002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Suellen Tayenne Pedrosa Pinto und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Materials and Prosthodontics, School of Dentistry, Sao Paulo State University - UNESP, Araraquara, SP, Brazil. Hauptthemen laut MEDLINE: Glass, Dental Bonding, Post and Core Technique, Dental Cements. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Statement of the problem Teeth with extensive coronal destruction face the challenge of retaining the restorative materials; however, glass fiber posts cemented with resin materials can help to address the issue. The retention of these posts depends on the bond strength to the dentin structure and may vary significantly along the root thirds.

Purpose

This study aimed to evaluate the effect of different luting materials and root thirds on the bonding strength of glass fiber posts to radicular dentin after hydrothermal aging. Materials and methods Seventy bovine incisors were divided into 7 groups (n = 10), according to the luting materials: Panavia V5 ( PV5 ), Rebilda DC ( RDC ), LuxaCore Z ( LCZ ), Allcem Core ( ACC ), RelyX Ultimate ( RXU ), RelyX U200 ( RXU200 ) or Fuji Plus ( FP ). After posts cementation, the roots were thermocycled (10,000 cycles; 5–55°C), sectioned into thirds, and tested for push-out bond strength (2.0 kN; 0.5 mm/min). Failure patterns were classified using a stereomicroscope, according to the material and root third. Data were statistically analyzed (α = 0.05).

Results

Bond strength significantly differed among root thirds for PV5 , ACC , RXU , and RXU200 (p < 0.05), while no significant differences were found for RDC , LCZ , and FP (p ≥ 0.05). PV5 and RXU exhibited the highest overall bond strength values. PV5 presented means of 14.97 ± 3.68 MPa (cervical), 11.08 ± 3.12 MPa (middle), and 10.47 ± 2.45 MPa (apical), while RXU showed 16.97 ± 4.22 MPa, 16.48 ± 3.61 MPa, and 6.51 ± 1.26 MPa, respectively. Overall, PV5 and RXU demonstrated superior and more consistent bond strength across root thirds, whereas the other cements displayed lower and more heterogeneous results.

Conclusions

The luting material influenced the bond strength of glass fiber posts to intraradicular dentin. Dual-cure resin cements with self-etch adhesive systems that contain functional monomers, such as PV5 and RXU , achieved more predictable adhesion, particularly in deep and complex regions. Clinical implications Analysis of bond strength and failure patterns supports clinical decision-making by identifying luting cements with superior retention, even in challenging regions, contributing to greater treatment longevity.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

GlassDental BondingPost and Core TechniqueDental CementsTooth RootAnimalsCattleResin CementsMaterials TestingDentin

Substanzen

fiberglassResin CementsDental Cements

Autor:innen und Institutionen

  • Department of Dental Materials and Prosthodontics, School of Dentistry, Sao Paulo State University - UNESP, Araraquara, SP, Brazil.
  • Private Practice, Sao Paulo, SP, Brazil.

ORCID-Profile: Suellen Tayenne Pedrosa Pinto, José Maurício Dos Santos Nunes Reis

Zitieren

APA

Pinto, S. T. P., de Moura Oliveira, C. R., Tanomaru-Filho, M., & Reis, J. M. D. S. N. (2026). Effect of luting materials and root third on glass fiber posts bonding strength after hydrothermal aging. PLOS One. https://doi.org/10.1371/journal.pone.0339002

Vancouver

Pinto STP, de Moura Oliveira CR, Tanomaru-Filho M, Reis JMDSN. Effect of luting materials and root third on glass fiber posts bonding strength after hydrothermal aging. PLOS One. 2026. doi:10.1371/journal.pone.0339002

BibTeX
@article{Pinto2026,
  author = {Pinto, Suellen Tayenne Pedrosa and de Moura Oliveira, Carlos Rangel and Tanomaru-Filho, Mário and Reis, José Maurício Dos Santos Nunes},
  title = {Effect of luting materials and root third on glass fiber posts bonding strength after hydrothermal aging},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0339002}
}
Kostenlos starten →