EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of shear-plastic slip mechanism based on TC4 titanium alloy

Bo Hu iD, Zichuan Zou, Pengfei Tian, Nian Xiao, Sen Yuan, Xianfeng Zhao

PLOS One · 2026

DOI: 10.1371/journal.pone.0338815 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von Bo Hu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Guizhou Institute of Technology, Guiyang, China. Hauptthemen laut MEDLINE: Titanium, Alloys, Plastics. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Higher Education Engineering Research Center of Guizhou Province, Guizhou Provincial Youth Science and Technology Talents Growth Project, Guizhou Association for Science and Technology New Quality Qianyan Leading Project - Youth Voyage Program 2025.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The stagnation point and dead metal zone in the cutting process directly or indirectly affect the chip formation and stress distribution, while the stress distribution in the machining process determines the plastic slip direction of the material. Aiming at the current insufficient research on the dead metal zone and stagnation point theory, this paper divides the cutting process into rounded edge contact stage and rounded edge-rake face contact, constructs a slip line field model with dead metal zone based on the stress distribution and pressure distribution of the two stages, calculates the slip line field through the Cauchy problem, and plots the slip line field through the secondary development port in SOLIDWORKS. The dead metal zone model is based on the stress distribution of the obtuse circular contact, and the stagnation point occurs at the critical condition of the elastic-plastic transition of the material, i.e., at the maximum shear stress of the process. The dead metal zone and stagnation point are examined based on simulation, and the slip line field model is verified experimentally. The results show that the dead metal zone model can be predicted more accurately when the tool rake angle is 15° or less, and the greatest influence on the stagnation point is the tool rake angle and the radius of the rounded edge of the tooltip, and the slip line field model containing the dead metal zone can more accurately reflect the plastic slip of the real cutting process. It can be seen that the dead metal zone model, stagnation point model, and slip line field model illustrate the cutting mechanism of the elastic and plastic phases of the cutting process, which lays a research foundation for the subsequent study of tool wear, chip formation, and machining surface quality.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumAlloysPlasticsStress, MechanicalShear StrengthModels, TheoreticalMaterials Testing

Substanzen

TitaniumAlloysPlastics

Autor:innen und Institutionen

  • School of Mechanical Engineering, Guizhou Institute of Technology, Guiyang, China.
  • School of Mechanical & Electrical Engineering, Guizhou Normal University, Guiyang, China.
  • School of Mechanical Engineering, Guizhou University, Guiyang, China.
  • Shizhen College of Guizhou University of Traditional Chinese Medicine, Guiyang, China.

ORCID-Profile: Bo Hu

Förderung

  • Higher Education Engineering Research Center of Guizhou Province
  • Guizhou Provincial Youth Science and Technology Talents Growth Project
  • Guizhou Association for Science and Technology New Quality Qianyan Leading Project - Youth Voyage Program 2025
  • Guizhou Provincial Department of Education 2025 “Hundreds of Schools and Thousands of Enterprises Science and Technology Tackling Unveiledâ€Program

Zitieren

APA

Hu, B., Zou, Z., Tian, P., Xiao, N., Yuan, S., & Zhao, X. (2026). Study of shear-plastic slip mechanism based on TC4 titanium alloy. PLOS One. https://doi.org/10.1371/journal.pone.0338815

Vancouver

Hu B, Zou Z, Tian P, Xiao N, Yuan S, Zhao X. Study of shear-plastic slip mechanism based on TC4 titanium alloy. PLOS One. 2026. doi:10.1371/journal.pone.0338815

BibTeX
@article{Hu2026,
  author = {Hu, Bo and Zou, Zichuan and Tian, Pengfei and Xiao, Nian and Yuan, Sen and Zhao, Xianfeng},
  title = {Study of shear-plastic slip mechanism based on TC4 titanium alloy},
  journal = {PLOS One},
  year = {2026},
  doi = {10.1371/journal.pone.0338815}
}
Kostenlos starten →