EUVIMEDEUVIMED entdecken
ValidierungsstudieOpen Access · CC BY 4.0

Design, 3D printing, and preclinical validation of an extraglottic ramp to facilitate blind orotracheal intubation in emergency airway management

Jorman H Tejada-Perdomo iD, Valentina Gutierrez-Perdomo, Juana V Agudelo-Castro iD, Jorge A Pérez-Gamboa, Alejandro Weinstein iD, Sebastián San Martín, Rodrigo Salas iD, Jorge A Ramos-Castaneda

PLOS One · 2025

DOI: 10.1371/journal.pone.0336978 ↗

Kurz gefasst

Validierungsstudie in der Zeitschrift PLOS One, 2025. Verfasst von Jorman H Tejada-Perdomo und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Clinical Sciences, Universidad Surcolombiana, Neiva, Colombia. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Intubation, Intratracheal, Airway Management, Equipment Design. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad Surcolombiana, Agencia Nacional de Investigación y Desarrollo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of devices that facilitate rapid airway isolation is essential when managing critical patients in emergencies. In recent years, additive manufacturing has emerged as an innovative, versatile, and accessible technology for developing medical devices. This study presents the design, development, and validation of an extraglottic medical device created using computer-aided design tools and stereolithographic 3D printing to facilitate blind intubation by first responders. The device was iteratively modeled and fabricated with biocompatible materials; validation in airway simulators and human cadaveric specimens assessed dimensions, friction, intubation technique, and learning curve, and ease of use was rated with a Likert scale. Ten iterations led to a final design with low friction and minimal cervical manipulation; ramp angle, cup geometry, and distal tip were optimized for tube passage, and BioMed Flex 80A showed high strength and anatomical compatibility. The final version is a safe, reusable, and functional alternative for airway management and blind orotracheal intubation, particularly in emergencies and resource-limited settings; clinical validation in live patients is still needed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalIntubation, IntratrachealAirway ManagementEquipment DesignHumansCadaverComputer-Aided Design

Autor:innen und Institutionen

  • Department of Clinical Sciences, Universidad Surcolombiana, Neiva, Colombia.
  • Department of Anesthesiology, Hospital Universitario Hernando Moncaleano Perdomo, Neiva, Colombia.
  • Research Group Desarrollo Social, Salud Pública y Derechos Humanos, Universidad Surcolombiana, Neiva, Colombia.
  • Diseñador Industrial, Neiva, Colombia.
  • Department of Electronic Engineering, Universidad Técnica Federico Santa Maria, Valparaiso, Chile.
  • Center of Interdisciplinary Biomedical and Engineering Research for Health (MEDING), School of Medicine, Faculty of Medicine, Universidad de Valparaíso, Viña del Mar, Chile.

ORCID-Profile: Jorman H Tejada-Perdomo, Juana V Agudelo-Castro, Alejandro Weinstein, Rodrigo Salas

Förderung

  • Universidad Surcolombiana
  • Agencia Nacional de Investigación y Desarrollo

Zitieren

APA

Tejada-Perdomo, J. H., Gutierrez-Perdomo, V., Agudelo-Castro, J. V., Pérez-Gamboa, J. A., Weinstein, A., San Martín, S., Salas, R., & Ramos-Castaneda, J. A. (2025). Design, 3D printing, and preclinical validation of an extraglottic ramp to facilitate blind orotracheal intubation in emergency airway management. PLOS One. https://doi.org/10.1371/journal.pone.0336978

Vancouver

Tejada-Perdomo JH, Gutierrez-Perdomo V, Agudelo-Castro JV, Pérez-Gamboa JA, Weinstein A, San Martín S, et al. Design, 3D printing, and preclinical validation of an extraglottic ramp to facilitate blind orotracheal intubation in emergency airway management. PLOS One. 2025. doi:10.1371/journal.pone.0336978

BibTeX
@article{TejadaPerdomo2025,
  author = {Tejada-Perdomo, Jorman H and Gutierrez-Perdomo, Valentina and Agudelo-Castro, Juana V and Pérez-Gamboa, Jorge A and Weinstein, Alejandro and San Martín, Sebastián and Salas, Rodrigo and Ramos-Castaneda, Jorge A},
  title = {Design, 3D printing, and preclinical validation of an extraglottic ramp to facilitate blind orotracheal intubation in emergency airway management},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0336978}
}
Kostenlos starten →