EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Programming Mat-Poka-yoke system control effect of unsteady convection-diffusion behavior for plastic manufacturing mathematically

Ahmed M Abed iD, Ali AlArjani, Laila F Seddek, Mohamed Salah, Ola Ragb, Rania B M Amer

PLOS One · 08.04.2026 · 21 (4) · e0336617

DOI: 10.1371/journal.pone.0336617 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 08.04.2026. Verfasst von Ahmed M Abed und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, College of Engineering, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia. Hauptthemen laut MEDLINE: Plastics, Convection, Models, Theoretical. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research, Prince Sattam bin Abdulaziz University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The blowing and drying stages in the plastic manufacturing process generate many defects due to a lack of accuracy in estimating thermal convection and its diffusion control. Therefore, dual digital poka-yoke simulator phases have been built to describe the unsteady state of convection-diffusion mathematically (i.e., parabolic behavior), and converted to ordinary type using a discrete singular convolution transformer. The numerical solution improves the mechanism of JRNS (Jidoka recruit’s network system) to be easily programmed to be highly controlled. The mathematical poka-yoke simulator formulation relies on Runge-Kutta 4 th order and five-stage fourth-order robust stability protective Runge-Kutta (SSP-RK54) schemes as discussed in 1 st phase and called Mat-Poka-Yoke system (Mat-PYS) alternating between three stages. The accuracy of the Mat-PYS has been tested via measuring the rate of convergence, the absolute error, the L2 error, and the L∞ error, with errors up to 1 × 1 0 − 5 . The obtained outcomes are described both in tabular and graphical form, which almost includes the validity of these mechanisms to hold on to the precision, efficiency, simplicity, and applicability for solving convection-diffusion equations. The applicability emphasized via parametric analysis to debate the effect of convective velocities, diffusion coefficients, and time at different locations on results to resist the defect causes generation as demonstrated in 2 nd phase. The OEE for plastic injection machine process has been improved from 76.6% to 88.9% when controlled by proposed mechanism, and products quality improved to 5.2 sigma level.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PlasticsConvectionModels, TheoreticalDiffusionComputer Simulation

Substanzen

Plastics

Autor:innen und Institutionen

  • Department of Industrial Engineering, College of Engineering, Prince Sattam bin Abdulaziz University, Al-Kharj, Saudi Arabia.
  • Department of Mathematics, College of Science and Humanities in Al-Kharj, Prince Sattam Bin Abdul-Aziz University, Al-Kharj, Saudi Arabia.
  • Department of Physics and Engineering Mathematics, Faculty of Engineering, Zagazig University, Egypt.

ORCID-Profile: Ahmed M Abed

Förderung

  • Deanship of Scientific Research, Prince Sattam bin Abdulaziz University

Zitieren

APA

Abed, A. M., AlArjani, A., Seddek, L. F., Salah, M., Ragb, O., & Amer, R. B. M. (2026). Programming Mat-Poka-yoke system control effect of unsteady convection-diffusion behavior for plastic manufacturing mathematically. PLOS One, 21(4), e0336617. https://doi.org/10.1371/journal.pone.0336617

Vancouver

Abed AM, AlArjani A, Seddek LF, Salah M, Ragb O, Amer RBM. Programming Mat-Poka-yoke system control effect of unsteady convection-diffusion behavior for plastic manufacturing mathematically. PLOS One. 2026;21(4):e0336617. doi:10.1371/journal.pone.0336617

BibTeX
@article{Abed2026,
  author = {Abed, Ahmed M and AlArjani, Ali and Seddek, Laila F and Salah, Mohamed and Ragb, Ola and Amer, Rania B M},
  title = {Programming Mat-Poka-yoke system control effect of unsteady convection-diffusion behavior for plastic manufacturing mathematically},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {4},
  pages = {e0336617},
  doi = {10.1371/journal.pone.0336617}
}
Kostenlos starten →