EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Predicting the uniaxial compressive strength and elasticity modulus of sandstones from physical and mechanical properties using statistical analyses and artificial intelligence-based techniques

Davood Fereidooni iD, Matloob Hejazifar

PLOS One · 15.05.2026 · 21 (5) · e0335703

DOI: 10.1371/journal.pone.0335703 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 15.05.2026. Verfasst von Davood Fereidooni und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Earth Sciences, Damghan University, Damghan, Semnan, Iran. Hauptthemen laut MEDLINE: Compressive Strength, Elastic Modulus, Artificial Intelligence, Sand. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Iran National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study develops predictive models for the uniaxial compressive strength (UCS) and elasticity modulus (E) of sandstones by integrating statistical analyses with artificial intelligence (AI) techniques. Comprehensive laboratory tests were performed on 20 sandstone samples from four Iranian formations, measuring key physical (dry unit weight γₐ = 23.34–26.10 kN/m³, porosity nₑ = 2.07–10.16%) and mechanical properties (UCS = 55.46–104.16 MPa, E = 39.86–57.03 GPa). Statistical analyses revealed strong correlations, with dry unit weight showing the highest Pearson correlation to UCS (R = 0.947) and E (R = 0.971), while porosity exhibited significant negative relationships (R = −0.918 and −0.916 respectively). Among the evaluated AI models, Artificial Neural Networks (ANN) demonstrated superior predictive capability, achieving the highest accuracy for both UCS and E predictions (e.g., UCS-Hs: R² = 0.992, RMSE = 1.562; E-Hs: R² = 0.947). In contrast, Random Forest (RF) and K-Nearest Neighbors (kNN) models provided acceptable but comparatively lower performance, with their best models attaining R² values of 0.909 and 0.906, respectively. Sensitivity analysis identified Schmidt hammer rebound (H₅) as the most influential predictor (Univariate Regression score = 3406.678), followed by point load index (PLI). The PDH formation demonstrated superior mechanical properties (UCS = 97.21 MPa, E = 54.82 GPa) linked to its high density (γₐ = 25.52–25.99 kN/m³) and low porosity (nₑ = 2.48–4.84%), while the HZD formation showed the weakest performance (UCS = 60.25 MPa) due to high porosity (nₑ = 8.02–10.16%). These findings provide a robust framework for predicting sandstone mechanical properties using non-destructive methods, offering significant advantages for geotechnical applications where direct testing is impractical.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Compressive StrengthElastic ModulusArtificial IntelligenceSandNeural Networks, ComputerRandom ForestPorosityPrediction Algorithms

Substanzen

Sand

Autor:innen und Institutionen

  • School of Earth Sciences, Damghan University, Damghan, Semnan, Iran.

ORCID-Profile: Davood Fereidooni

Förderung

  • Iran National Science Foundation

Zitieren

APA

Fereidooni, D., & Hejazifar, M. (2026). Predicting the uniaxial compressive strength and elasticity modulus of sandstones from physical and mechanical properties using statistical analyses and artificial intelligence-based techniques. PLOS One, 21(5), e0335703. https://doi.org/10.1371/journal.pone.0335703

Vancouver

Fereidooni D, Hejazifar M. Predicting the uniaxial compressive strength and elasticity modulus of sandstones from physical and mechanical properties using statistical analyses and artificial intelligence-based techniques. PLOS One. 2026;21(5):e0335703. doi:10.1371/journal.pone.0335703

BibTeX
@article{Fereidooni2026,
  author = {Fereidooni, Davood and Hejazifar, Matloob},
  title = {Predicting the uniaxial compressive strength and elasticity modulus of sandstones from physical and mechanical properties using statistical analyses and artificial intelligence-based techniques},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {5},
  pages = {e0335703},
  doi = {10.1371/journal.pone.0335703}
}
Kostenlos starten →