EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Introducing FMEA plus method for comprehensive safety risk assessment in the steel industry

Ahmad Soltanzadeh, Esmaeil Zarei iD, Mohsen Mahdinia iD, Kiana Hosseinzadeh, Mohsen Sadeghi-Yarandi iD

PLOS One · 2025

DOI: 10.1371/journal.pone.0331748 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Ahmad Soltanzadeh und 4 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Environmental Pollutants, Department of Occupational Safety & Health Engineering, Faculty of Health, Qom University of Medical Sc…. Hauptthemen laut MEDLINE: Steel. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Addressing the challenge of employing a comprehensive risk analysis approach that effectively captures and quantifies all contributing factors remains a significant endeavor in both academic research and practical field applications. This study endeavors to fill this gap by introducing a practical safety risk assessment approach, named the FMEA+ method, grounded in the conventional Failure Modes and Effects Analysis. To construct a comprehensive taxonomy that encompasses the contributing factors within each dimension of risk, a three-stage Delphi study engaged 35 Subject Matter Experts (SMEs). The Fuzzy Analytical Hierarchy Process (FAHP) was employed to acquire knowledge and assign weights to the factors and sub-factors. The validation and reliability assessment of the developed taxonomy included evaluating the Content Validity Ratio (CVR), Content Validity Index (CVI), and Cronbach’s alpha coefficient, yielding values of 0.77, 0.91, and 0.86, respectively. Independent peer reviews and reality checks further substantiated the credibility of the proposed taxonomy. The introduced safety risk assessment algorithm, FMEA + , derived from the FMEA technique, comprises three main factors and 12 sub-factors. The final normalized weights for the three factors—occurrence, severity, and detectability—were determined to be 0.337, 0.348, and 0.315, respectively. In the three factors of occurrence, severity, and detection, the most important sub-factors identified were human reliability, human injury, and technical inspection, respectively. This proposed taxonomy serves as a foundational tool for facilitating informed decision-making and the effective implementation of risk mitigation strategies. The application of this innovative approach offers a scientific alternative to traditional FMEA methods within similar industries, addressing existing challenges in a more comprehensive and nuanced manner.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SteelRisk AssessmentHumansDelphi TechniqueAlgorithmsReproducibility of ResultsFuzzy Logic

Substanzen

Steel

Autor:innen und Institutionen

  • Research Center for Environmental Pollutants, Department of Occupational Safety & Health Engineering, Faculty of Health, Qom University of Medical Sciences and Health Services, Qom, Iran.
  • Department of Safety Science, College of Aviation, Embry-Riddle Aeronautical University, Prescott, Arizona, United States of America.
  • Department of Occupational health and safety engineering, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran.
  • Health in Emergency and Disaster Research Center, Social Health Research Institute, University of Social Welfare and Rehabilitation Sciences, Tehran, Iran.

ORCID-Profile: Esmaeil Zarei, Mohsen Mahdinia, Mohsen Sadeghi-Yarandi

Zitieren

APA

Soltanzadeh, A., Zarei, E., Mahdinia, M., Hosseinzadeh, K., & Sadeghi-Yarandi, M. (2025). Introducing FMEA plus method for comprehensive safety risk assessment in the steel industry. PLOS One. https://doi.org/10.1371/journal.pone.0331748

Vancouver

Soltanzadeh A, Zarei E, Mahdinia M, Hosseinzadeh K, Sadeghi-Yarandi M. Introducing FMEA plus method for comprehensive safety risk assessment in the steel industry. PLOS One. 2025. doi:10.1371/journal.pone.0331748

BibTeX
@article{Soltanzadeh2025,
  author = {Soltanzadeh, Ahmad and Zarei, Esmaeil and Mahdinia, Mohsen and Hosseinzadeh, Kiana and Sadeghi-Yarandi, Mohsen},
  title = {Introducing FMEA plus method for comprehensive safety risk assessment in the steel industry},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0331748}
}
Kostenlos starten →