EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of inner panel thickness for enhanced stiffness and vibration control in car door assemblies

Pandurang Maruti Jadhav, Kishor B Waghulde, Venushree Khanke, Rupesh V Bhortake, Prasad D Kulkarni, Mohammad Israr, Muazu Jibrin Musa iD, Md Irfanul Haque Siddiqui, Subhav Singh, Deekshant Varshaney

PLOS One · 2025

DOI: 10.1371/journal.pone.0331318 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Pandurang Maruti Jadhav und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, Maharashtra, India. Hauptthemen laut MEDLINE: Vibration, Automobiles. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The inner panel of the side door acts as a backbone of the door assembly. It is designed to accommodate all the parts required to complete the door assembly and its intended functions. The stiffness of the inner panel indirectly protects the inside passengers from weather conditions and side impacts. The inner panel, outer panel, and a few stiffener plates comprise the door’s structure. The preferred method of hemming is used to connect the inner panel and outer panel at their periphery. In hemming, the crimping of the inner panel is done by using the “U” shape of the outer panel at its periphery. The inner panel and the outer panel together will have a cutout, which will provide clear visibility to both inside passengers and outsiders through this cutout cum window. The closing and opening of this window will be controlled by the electric motor-operated window glass regulator mechanism. The assessment of the Swift Dzire side door assembly was carried out to determine the impact of the inner panel thickness variations on the dynamic characteristics of the door assembly. Effects have been studied and tried out to establish the relationship with thickness. In general, the car users or passengers and the door are in contact. So, the dynamic parameters of the door assembly have been studied, which are related to comfort. These parameters are natural frequencies, mode shapes, dynamic stiffness, and vibrations of the outer panel within the frequency band of 0 Hz to 100 Hz. Mainly, the research study was performed on the baseline inner panel of 1.367 mm thick, and thickness variations were studied between 1.0 mm to 2.4 mm, with an increment of 0.2 mm. The door outer panel/surface dynamic stiffness and vibrations were investigated at 15 critical locations. Based on the output, dynamic results such as modal frequency, mode shape, local dynamic stiffness, and surface vibrations. A relationship has been established between these dynamic parameters and thickness variation of the inner panel, and finally, the optimal thickness has been suggested to meet the required targets.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

VibrationAutomobilesHumansEquipment Design

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Dr. D. Y. Patil Institute of Technology, Pimpri, Pune, Maharashtra, India.
  • Department of Civil Engineering, AISSMS College of Engineering, Pune, Maharashtra, India.
  • Department of Mechanical Engineering, Marathwada Mitramandal's Institute of Technology, Pune, Maharashtra, India.
  • Department of Mechanical Engineering, Annasaheb Dange College of Engineering and Technology, Ashta, Maharashtra, India.
  • President, Maryam Abacha American University of Nigeria Hotoro GRA, Kano State, Federal Republic of Nigeria.
  • Department of Computer Engineering, Maryam Abacha American University of Niger, Maradi, Republic of Niger.

ORCID-Profile: Muazu Jibrin Musa

Zitieren

APA

Jadhav, P. M., Waghulde, K. B., Khanke, V., Bhortake, R. V., Kulkarni, P. D., Israr, M., Musa, M. J., Siddiqui, M. I. H., Singh, S., & Varshaney, D. (2025). Optimization of inner panel thickness for enhanced stiffness and vibration control in car door assemblies. PLOS One. https://doi.org/10.1371/journal.pone.0331318

Vancouver

Jadhav PM, Waghulde KB, Khanke V, Bhortake RV, Kulkarni PD, Israr M, et al. Optimization of inner panel thickness for enhanced stiffness and vibration control in car door assemblies. PLOS One. 2025. doi:10.1371/journal.pone.0331318

BibTeX
@article{Jadhav2025,
  author = {Jadhav, Pandurang Maruti and Waghulde, Kishor B and Khanke, Venushree and Bhortake, Rupesh V and Kulkarni, Prasad D and Israr, Mohammad and Musa, Muazu Jibrin and Siddiqui, Md Irfanul Haque and Singh, Subhav and Varshaney, Deekshant},
  title = {Optimization of inner panel thickness for enhanced stiffness and vibration control in car door assemblies},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0331318}
}
Kostenlos starten →