EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lightweight design based on automotive drive axle housing

Yingshuai Liu iD, Chenxing Liu, Jianwei Tan iD, Yunli He

PLOS One · 2025

DOI: 10.1371/journal.pone.0331300 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Yingshuai Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Shandong Huayu University of Technology, Dezhou, China. Hauptthemen laut MEDLINE: Automobiles, Equipment Design. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the limitations in the cruising range and improve the overall efficiency of Pure Electric Vehicles (PEVs), this study focuses on the lightweight design of PEV drive axles. Aligning with the current trend toward lightweight and integrated development in electric vehicles, the research is based on the concept of an integrated electric drive axle housing. A three-dimensional model of the electric vehicle axle was developed using three-dimensional modeling software(3D modeling software), taking into account the working principles and load characteristics of the electric drive axle. Subsequently, Finite Element Analysis (FEA) was performed using finite element analysis software to evaluate the stiffness, strength, and modal characteristics of the integrated electric drive axle housing. The study analyzed stress distribution, deformation patterns, and natural frequency ranges under various operating conditions. Based on the FEA results, the axle housing structure was optimized by reducing the wall thickness and modifying the material of components subjected to lower stress levels, with the goal of minimizing mass. The optimal solution involved adjusting the housing thickness to achieve a more uniform and efficient thickness distribution, thereby meeting the lightweight design objectives. Simulation verification of the optimized axle structure confirmed that the weight reduction was achieved without compromising the required strength and stiffness. The findings demonstrate that, while ensuring safety, the optimized axle structure achieved a 12% reduction in weight. This study provides a feasible solution and a solid theoretical foundation for advancing the development of lightweight electric vehicles.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AutomobilesEquipment DesignFinite Element AnalysisComputer SimulationModels, Theoretical

Autor:innen und Institutionen

  • School of Mechanical Engineering, Shandong Huayu University of Technology, Dezhou, China.
  • National Lab of Auto Performance and Emission Test, School of Mechanical and Vehicular Engineering, Beijing Institute of Technology, Beijing, China.

ORCID-Profile: Yingshuai Liu, Jianwei Tan

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, Y., Liu, C., Tan, J., & He, Y. (2025). Lightweight design based on automotive drive axle housing. PLOS One. https://doi.org/10.1371/journal.pone.0331300

Vancouver

Liu Y, Liu C, Tan J, He Y. Lightweight design based on automotive drive axle housing. PLOS One. 2025. doi:10.1371/journal.pone.0331300

BibTeX
@article{Liu2025,
  author = {Liu, Yingshuai and Liu, Chenxing and Tan, Jianwei and He, Yunli},
  title = {Lightweight design based on automotive drive axle housing},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0331300}
}
Kostenlos starten →