EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Adaptive force-position-speed collaborative process planning and roughness prediction for robotic polishing

Ma Haohao iD, Azizan As'arry iD, Niu Jing, Mohd Idris Shah Ismail, Hafiz Rashidi Ramli, M Y M Zuhri, Aidin Delgoshaei

PLOS One · 03.09.2025 · 20 (9) · e0330979

DOI: 10.1371/journal.pone.0330979 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 03.09.2025. Verfasst von Ma Haohao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronics and Automotive Engineering, Tianshui Normal University, Tianshui, China. Hauptthemen laut MEDLINE: Robotics. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Geran Putra Inisiatif (GPI) fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, an adaptive force-position-speed collaborative process planning framework for robot polishing was proposed to improve the stability of the robot polishing process. The material removal model based on Preston’s theory was studied, and the factors of polishing pressure, tool speed, feed speed, and sandpaper type were considered to design the manual polishing experiment. The improved Dung Beetle Optimization algorithm, Back Propagation Neural Network, Finite Element Analysis, and Response Surface Methodology provide a strong guarantee for the selection of robot polishing process parameters. For curved workpieces, the curvature adaptive interpolation method is introduced to generate trajectories. An adaptive impedance control strategy is implemented to enhance force control, and PD iteration and RBF neural networks are used to ensure stable contact force and accuracy. The experimental results show that the root mean square error (RMSE) accuracy of the established roughness prediction model reaches 0.0001 µm, the proposed force control method is more stable, and the surface roughness is reduced by 20.79% on average compared to the baseline method, which proves the effectiveness of the framework in achieving high precision and high efficiency of robot polishing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RoboticsAlgorithmsNeural Networks, ComputerSurface PropertiesFinite Element AnalysisModels, Theoretical

Autor:innen und Institutionen

  • School of Mechatronics and Automotive Engineering, Tianshui Normal University, Tianshui, China.
  • Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang, Malaysia.
  • Department of Electrical and Electronic Engineering, Faculty of Engineering, Universiti Putra Malaysia, Serdang, Malaysia.
  • Advanced Engineering Materials and Composites Research Centre (AEMC), Department of Mechanical and Manufacturing Engineering, University Putra Malaysia, Serdang, Malaysia.
  • Laboratory of Biocomposite Technology, Institute of Tropical Forestry and Forest Product (INTROP), University Putra Malaysia, Serdang, Malaysia.
  • School of Professional Studies, University of Kansas Edwards Campus, Overland Park, Kansas, United States of America.

ORCID-Profile: Ma Haohao, Azizan As'arry

Förderung

  • Geran Putra Inisiatif (GPI) fund

Zitieren

APA

Haohao, M., As'arry, A., Jing, N., Ismail, M. I. S., Ramli, H. R., Zuhri, M. Y. M., & Delgoshaei, A. (2025). Adaptive force-position-speed collaborative process planning and roughness prediction for robotic polishing. PLOS One, 20(9), e0330979. https://doi.org/10.1371/journal.pone.0330979

Vancouver

Haohao M, As'arry A, Jing N, Ismail MIS, Ramli HR, Zuhri MYM, et al. Adaptive force-position-speed collaborative process planning and roughness prediction for robotic polishing. PLOS One. 2025;20(9):e0330979. doi:10.1371/journal.pone.0330979

BibTeX
@article{Haohao2025,
  author = {Haohao, Ma and As'arry, Azizan and Jing, Niu and Ismail, Mohd Idris Shah and Ramli, Hafiz Rashidi and Zuhri, M Y M and Delgoshaei, Aidin},
  title = {Adaptive force-position-speed collaborative process planning and roughness prediction for robotic polishing},
  journal = {PLOS One},
  year = {2025},
  volume = {20},
  number = {9},
  pages = {e0330979},
  doi = {10.1371/journal.pone.0330979}
}
Kostenlos starten →