EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling and application of production metering for electric pump wells without downhole pressure measurement devices

Yongcang Ren, Da Guo, Yizhen Sun iD, Bao Zhang, Jianxin Shen, Yingbin Liu, Yinglin Zhang, Guoxiang Zhang, Jinsong Yao, Xueling Du

PLOS One · 2025

DOI: 10.1371/journal.pone.0330283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Yongcang Ren und 9 weiteren Autor:innen. Beteiligte Einrichtung: R&D Center for Ultra Deep Complex Reservoir Exploration and Development, CNPC Korla, Korla, Xinjiang, China. Hauptthemen laut MEDLINE: Models, Theoretical, Oil and Gas Fields, Oil and Gas Industry. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the issues of low frequency and high costs associated with the current manual production measurement for ESP wells in the Tarim Oilfield, a study was conducted to develop a digital production measurement method for ESP wells. Based on the principle of energy conservation, where the input power of the pump equals the output power of the motor, and incorporating parameters such as surface tubing and casing pressure, motor current, and motor/ pump performance curves, with viscosity correction of the pump performance curve, a corrected power calculation method was proposed. A digital production measurement mathematical model was established. According to feedback from field applications, the calculated results of this method align well with the metered results when corrected using on-site measured flow rate. Furthermore, by applying this model, accurate allocation of merged production well outputs and risk warning or failure diagnosis for oil wells can be achieved. This method not only improves the accuracy and efficiency of ESP well production calculations but also enables real-time reflection of oil well production trends, contributing to intelligent production management in the Tarim Oilfield and significantly enhancing the level of oilfield production management.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Models, TheoreticalOil and Gas FieldsOil and Gas IndustryPressureElectricity

Autor:innen und Institutionen

  • R&D Center for Ultra Deep Complex Reservoir Exploration and Development, CNPC Korla, Korla, Xinjiang, China.
  • Engineering Research Center for Ultra-deep Complex Reservoir Exploration and Development, Xinjiang Uygur Autonomous Region Korla, Korla, Xinjiang, China.
  • Xinjiang Key Laboratory of Ultra-deep Oil and Gas Korla, Korla, Xinjiang, China.
  • PetroChina Tarim Oilfield Branch, Korla, Xinjiang, China.
  • Research Institute of Petroleum Exploration and Development, Beijing, China.

ORCID-Profile: Yizhen Sun

Zitieren

APA

Ren, Y., Guo, D., Sun, Y., Zhang, B., Shen, J., Liu, Y., Zhang, Y., Zhang, G., Yao, J., & Du, X. (2025). Modeling and application of production metering for electric pump wells without downhole pressure measurement devices. PLOS One. https://doi.org/10.1371/journal.pone.0330283

Vancouver

Ren Y, Guo D, Sun Y, Zhang B, Shen J, Liu Y, et al. Modeling and application of production metering for electric pump wells without downhole pressure measurement devices. PLOS One. 2025. doi:10.1371/journal.pone.0330283

BibTeX
@article{Ren2025,
  author = {Ren, Yongcang and Guo, Da and Sun, Yizhen and Zhang, Bao and Shen, Jianxin and Liu, Yingbin and Zhang, Yinglin and Zhang, Guoxiang and Yao, Jinsong and Du, Xueling},
  title = {Modeling and application of production metering for electric pump wells without downhole pressure measurement devices},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0330283}
}
Kostenlos starten →