EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of calcined bauxite aggregates on the polishing resistance and skid resistance performance of SMA-7 asphalt mixtures

Pengfei Li, Lingkun Kong, Nan Mao, Chenwei Gu iD

PLOS One · 2025

DOI: 10.1371/journal.pone.0329579 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Pengfei Li und 3 weiteren Autor:innen. Beteiligte Einrichtung: CCCC Second Highway Engineering Bureau Third Engineering CO., LTD, Xi'an, China. Hauptthemen laut MEDLINE: Hydrocarbons, Aluminum Oxide. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for Central Universities of the Central South University, CHD.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-performance anti-skid asphalt mixtures are essential for improving skid resistance and pavement durability. This study investigates the skid resistance performance of small-aggregate-size SMA-7 asphalt mixtures using calcined bauxite (CB) aggregates. Four types of aggregates—75#, 85#, and 88# CB and limestone—were used in the mixture preparation. Various laboratory tests, including pavement performance, Polished Stone Value (PSV) of aggregates, three-wheel polishing, and dynamic friction tests, were conducted to evaluate the performance and friction characteristics of the mixtures at various polishing stages. The results indicate that the optimal coarse-to-fine aggregate ratio for SMA-7 is 75:25, with a maximum particle size of 6.35 mm. The PSV of 88# CB aggregate stabilizes after 120,000 polishing cycles, exhibiting a decay rate 30% slower than that of limestone aggregates. Among the mixtures, 88#CB-SMA demonstrates superior high-temperature stability (1.5 times higher than limestone), slightly better low-temperature crack resistance, and significantly enhanced polishing resistance. Additionally, the dynamic friction coefficients of CB mixtures show slower attenuation, retaining 29.4–36.3% higher residual friction compared to limestone even after prolonged polishing. Strong correlations (R 2 > 0.85) between the attenuation rates of PSV and dynamic friction coefficients confirm that the enhanced wear resistance of CB aggregates is key to long-term skid resistance, particularly at lower speeds. These findings suggest that high-grade CB aggregates greatly improve both the skid resistance and overall performance of asphalt mixtures, providing valuable insights for designing durable small-size asphalt wear layers.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrocarbonsAluminum OxideFrictionParticle SizeMaterials TestingCalcium Carbonate

Substanzen

asphaltHydrocarbonsAluminum OxideCalcium Carbonate

Autor:innen und Institutionen

  • CCCC Second Highway Engineering Bureau Third Engineering CO., LTD, Xi'an, China.
  • School of highway, Chang'an University, Xi'an, China.
  • Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang'an University, Xi'an, China.

ORCID-Profile: Chenwei Gu

Förderung

  • Fundamental Research Funds for Central Universities of the Central South University, CHD

Zitieren

APA

Li, P., Kong, L., Mao, N., & Gu, C. (2025). Impact of calcined bauxite aggregates on the polishing resistance and skid resistance performance of SMA-7 asphalt mixtures. PLOS One. https://doi.org/10.1371/journal.pone.0329579

Vancouver

Li P, Kong L, Mao N, Gu C. Impact of calcined bauxite aggregates on the polishing resistance and skid resistance performance of SMA-7 asphalt mixtures. PLOS One. 2025. doi:10.1371/journal.pone.0329579

BibTeX
@article{Li2025,
  author = {Li, Pengfei and Kong, Lingkun and Mao, Nan and Gu, Chenwei},
  title = {Impact of calcined bauxite aggregates on the polishing resistance and skid resistance performance of SMA-7 asphalt mixtures},
  journal = {PLOS One},
  year = {2025},
  doi = {10.1371/journal.pone.0329579}
}
Kostenlos starten →