Experimental study on polymer friction composite with natural friction modifiers for brake pads
PLOS One · 08.09.2025 · 20 (9) · e0328987
DOI: 10.1371/journal.pone.0328987 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 08.09.2025. Verfasst von Mitali Gore und 5 weiteren Autor:innen. Beteiligte Einrichtung: Zeal College of Engineering and Research, Pune, Maharashtra, India. Hauptthemen laut MEDLINE: Friction, Polymers. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.
Abstract (Originalsprache)
The increasing concern over environmental pollution from brake dust and the adverse impacts of conventional brake pad materials, such as metallic, semi-metallic, and ceramic composites, has prompted the exploration of more sustainable alternatives. Traditional brake pads release harmful non-exhaust emissions that contribute to air pollution and wear down quickly, posing both environmental and operational challenges. This study investigates the development and performance evaluation of polymer friction composites enhanced with natural friction modifiers sourced from agricultural waste materials like walnut shell, coconut shell, and groundnut shell powders. These materials were selected for their biodegradability, lightweight properties, and cost-effectiveness. Three types of polymer reinforced composites—WPRC (Walnut Powder Reinforced Composite), CNPRC (Coconut Shell Powder Reinforced Composite), and GNPRC (Groundnut Shell Powder Reinforced Composite)—were manufactured according to ASTM G99 standards. A pin-on-disc tribometer or an L27 Taguchi experimental setup were used to measure friction and wear. The tests showed that WPRC had the best general performance of all the composites that were tried. It had stable coefficients of friction and a low specific wear rate. The results indicate that natural friction modifiers could improve the environmental and operational performance of polymer composites, by replacing existing brake pad materials with a more environmentally friendly alternative.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Zeal College of Engineering and Research, Pune, Maharashtra, India.
- Department of Mechanical Engineering, MKSSS's Cummins College of Engineering for Women, Pune, Maharashtra, India.
- Department of Mechanical Engineering, Tolani Maritime Institute Induri, Pune, Maharashtra, India.
- Department of Machining, Assembly and Engineering Metrology, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava, Ostrava, Czech Republic.
- Department of Biosciences, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Chennai, Tamil Nadu, India.
- Department of Mechanical Engineering, Gazi University Faculty of Engineering, Maltepe, Ankara, Turkey.
ORCID-Profile: Sachin Salunkhe
Förderung
- King Saud University
Zitieren
APA
Gore, M., Bhosale, A., Naidu, M., Čep, R., Salunkhe, S., & Nasr, E. A. (2025). Experimental study on polymer friction composite with natural friction modifiers for brake pads. PLOS One, 20(9), e0328987. https://doi.org/10.1371/journal.pone.0328987
Vancouver
Gore M, Bhosale A, Naidu M, Čep R, Salunkhe S, Nasr EA. Experimental study on polymer friction composite with natural friction modifiers for brake pads. PLOS One. 2025;20(9):e0328987. doi:10.1371/journal.pone.0328987
BibTeX
@article{Gore2025,
author = {Gore, Mitali and Bhosale, Ajit and Naidu, Mithul and Čep, Robert and Salunkhe, Sachin and Nasr, Emad Abouel},
title = {Experimental study on polymer friction composite with natural friction modifiers for brake pads},
journal = {PLOS One},
year = {2025},
volume = {20},
number = {9},
pages = {e0328987},
doi = {10.1371/journal.pone.0328987}
}
EUVIMED