Preparation process and properties of polyurethane/phosphogypsum-modified asphalt and its mixtures
PLOS One · 2025
DOI: 10.1371/journal.pone.0327312 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Jinshun Xue und 4 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Key Laboratory of Vehicle-infrastructure Cooperation and Traffic Control, Xiangyang, China.; Hubei Key Laboratory of Power System Design and Te…. Hauptthemen laut MEDLINE: Polyurethanes, Phosphorus, Calcium Sulfate, Hydrocarbons. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hubei Provincial Natural Science Foundation of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The preparation process parameters and composition of polyurethane/phosphogypsum-modified asphalt were studied to achieve comprehensive utilization of phosphogypsum and reduce asphalt pavement costs while ensuring performance compliance. Additionally, the aging resistances of the modified asphalt and its mixtures were investigated. The results showed that the order of the influence of the different preparation process parameters on the performance of modified asphalt is preparation temperature, storage time, reaction time, and shear rate. The optimal preparation process parameters, namely 130°C preparation temperature, 2000 rpm shear rate, 1.5 h reaction time, and 1.0 h storage time, of polyurethane/phosphogypsum composite-modified asphalt are recommended based on the experimental results. Polyurethane/phosphogypsum-modified asphalt with 3% component A, 1% component B, 5% phosphogypsum, and 0.5% coupling agent exhibited superior performance. The average change rates of the modified asphalt properties after short- and long-term aging were 23.9% and 42.2% lower than those of the base asphalt, respectively. Finally, the modified asphalt mixture exhibited average change rates of 8.7% and 18.2% in high-temperature performance after short- and long-term aging, respectively, which were significantly lower than the change rates of 15.3% and 23.5% observed in the base asphalt mixture.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Hubei Key Laboratory of Vehicle-infrastructure Cooperation and Traffic Control, Xiangyang, China.; Hubei Key Laboratory of Power System Design and Test for Electrical Vehicle, Hubei University of Arts and Science, Xiang…
- Henan Xingmi Expressway Co., Ltd, Zhengzhou, China.
- HPCPDI Ruizhi Transportation Technology Consulting Co., Ltd., Hebei Province Road Structure and Material Technology Innovation Center Shijiazhuang, Shijiazhuang, China.
- School of Civil Engineering and Architecture, Hubei University of Arts and Science, Xiangyang, China.
ORCID-Profile: Jinshun Xue
Förderung
- Hubei Provincial Natural Science Foundation of China
- National Natural Science Foundation of China
Zitieren
APA
Xue, J., Yang, Y., Li, J., Zhao, W., & Wang, Y. (2025). Preparation process and properties of polyurethane/phosphogypsum-modified asphalt and its mixtures. PLOS One. https://doi.org/10.1371/journal.pone.0327312
Vancouver
Xue J, Yang Y, Li J, Zhao W, Wang Y. Preparation process and properties of polyurethane/phosphogypsum-modified asphalt and its mixtures. PLOS One. 2025. doi:10.1371/journal.pone.0327312
BibTeX
@article{Xue2025,
author = {Xue, Jinshun and Yang, Yu and Li, Junfeng and Zhao, Wei and Wang, Yuanyuan},
title = {Preparation process and properties of polyurethane/phosphogypsum-modified asphalt and its mixtures},
journal = {PLOS One},
year = {2025},
doi = {10.1371/journal.pone.0327312}
}
EUVIMED