Eco-friendly degreasing adsorbent derived from oily scum and walnut shells for oilfield sewage treatment and industrial oils adsorption
PLOS One · 2025
DOI: 10.1371/journal.pone.0324631 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2025. Verfasst von Chao Tang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Hydraulic Engineering, Chongqing Water Resources and Electric Engineering College, Yongchuan, Chongqing, China. Hauptthemen laut MEDLINE: Juglans, Sewage, Industrial Oils, Oil and Gas Fields. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major Science Research Special Foundation of Chongqing Water Resources and Electric Engineering College, Science and Technology Research Program of Chongqing Municipal Education Commission.
Abstract (Originalsprache)
Oily scum (OS) and walnut shells (WS) were employed to produce an eco-friendly degreasing adsorbent (DA) for the treatment of oilfield sewage and the adsorption of industrial oils. The optimal conditions for preparing DA were established as follows: a mass ratio of OS to WS of 1:2, a pyrolysis temperature of 600°C, a heating rate of 10°C/min, and a pyrolysis duration of 2 hours. The carbon mass fraction in DA was determined to be 90.72%, with a BET specific surface area of 563.31 m 2 /g, a pore volume of 0.794 cm 3 /g, and an average pore size of 5.618 nm. The pores were predominantly mesoporous, centered around a size of 3 nm. In oilfield sewage treatment tests, DA achieved a remarkable reduction of 92.64% in the petroleum content of oilfield sewage, outperforming activated carbon (AC) treatment by 13.52% under identical conditions. In tests for industrial oil adsorption, DA demonstrated initial adsorption rates of 138.55 mg/(g·min) for diesel and 189.52 mg/(g·min) for crude oil, achieving cumulative adsorption capacities of 973.3 mg/g and 1017 mg/g for diesel and crude oil, respectively. Thermal regeneration of DA significantly enhanced its oil affinity, markedly improving its initial adsorption rates. Furthermore, the cumulative adsorption capacity of regenerated DA for diesel and crude oil reached 966.88 mg/g and 946.15 mg/g respectively, surpassing that of regenerated AC for diesel (585.47 mg/g) and crude oil (849.21 mg/g). Additionally, DA showed a shorter penetration adsorption time, positioning it as a feasible option for recycling and as an eco-friendly emergency adsorbent in the context of industrial oil spills.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Faculty of Hydraulic Engineering, Chongqing Water Resources and Electric Engineering College, Yongchuan, Chongqing, China.
- State Key Laboratory of Petroleum and Pollution Control, China National Petroleum Corporation, Beijing, China.
ORCID-Profile: Chao Tang
Förderung
- Major Science Research Special Foundation of Chongqing Water Resources and Electric Engineering College
- Science and Technology Research Program of Chongqing Municipal Education Commission
Zitieren
APA
Tang, C., Guan, J., & Lin, Y. (2025). Eco-friendly degreasing adsorbent derived from oily scum and walnut shells for oilfield sewage treatment and industrial oils adsorption. PLOS One. https://doi.org/10.1371/journal.pone.0324631
Vancouver
Tang C, Guan J, Lin Y. Eco-friendly degreasing adsorbent derived from oily scum and walnut shells for oilfield sewage treatment and industrial oils adsorption. PLOS One. 2025. doi:10.1371/journal.pone.0324631
BibTeX
@article{Tang2025,
author = {Tang, Chao and Guan, Jiaojiao and Lin, Yuliang},
title = {Eco-friendly degreasing adsorbent derived from oily scum and walnut shells for oilfield sewage treatment and industrial oils adsorption},
journal = {PLOS One},
year = {2025},
doi = {10.1371/journal.pone.0324631}
}
EUVIMED