Evaluating turnaround time to improve clients’ satisfaction in the tuberculosis reference laboratory in Douala
PLOS One · 13.06.2025 · 20 (6) · e0323917
DOI: 10.1371/journal.pone.0323917 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 13.06.2025. Verfasst von Teyim Pride Mbuh und 8 weiteren Autor:innen. Beteiligte Einrichtung: Field Epidemiology Training Program, Yaoundé, Cameroon. Hauptthemen laut MEDLINE: Patient Satisfaction, Tuberculosis. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Introduction Delivery delays of laboratory results can result in death and/or economic loss to both the patient and the health system. Data is limited regarding turnaround time for tuberculosis testing in Cameroon. We evaluated intra- turnaround time in tuberculosis diagnosis, identified root causes, and brainstormed solutions to improve patient satisfaction. Materials and methods In this cross-sectional descriptive study, turnaround time for the pre-analytic phase was set at 3 hours, the analytic phase at 11 hours, and the post-analytic phase at 10 hours. The overall turnaround time was 24 hours. We used the Fishbone method of problem analysis involving the personnel of the Tuberculosis Reference Laboratory-Douala, to identify root causes. We brainstormed using the “Whys” causes of turnaround time failure during the process of tuberculosis diagnosis by GeneXpert MTB/RIF Results We analyzed samples from 526 clients. The median turnaround time was 45 (Range: 2-120) hours. A total of 216(41.1%) clients had a turnaround time failure. The turnaround time failures in the pre-analytic, analytic, and post-analytics phases were 64(29.6%), 128(59.3%), and 12(11.1%) respectively. Overall, 19 root causes of turnaround time failure were identified and grouped into six categories, namely: equipment, administration, technical-staff, environment, material, and method. Equipment maintenance (defective or non-calibrated modules) was the critical cause of turnaround time failures accounting for 86 (39.8%) of the overall turnaround time failure. Conclusion turnaround time in tuberculosis diagnosis is longer than expected, retarding patient care management. Focusing on equipment maintenance enhances the intra-laboratory testing process, thus improving overall patient satisfaction. The need for further studies to incorporate the extra-laboratory turnaround time in assessing the overall turnaround time is imperative.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Field Epidemiology Training Program, Yaoundé, Cameroon.
- Tuberculosis Reference Laboratory Douala, Cameroon.
- Directorate for the Fight against Disease, Epidemics and Pandemics, Ministry of Public Health, Yaoundé, Cameroon.
- Centre Pasteur Cameroun, Yaoundé, Cameroon.
- Programme National de Lutte contre la tuberculose Cameroun, Yaoundé, Cameroon.
ORCID-Profile: Teyim Pride Mbuh
Zitieren
APA
Mbuh, T. P., Amveilla, A. P., Mendjime, P., Donkeng Donfack, V. F., Youssouf Mfouapon, M., Beloko, H., Annie Prudence, B. N., Linda, E., & Etoundi Mballa, G. A. (2025). Evaluating turnaround time to improve clients’ satisfaction in the tuberculosis reference laboratory in Douala. PLOS One, 20(6), e0323917. https://doi.org/10.1371/journal.pone.0323917
Vancouver
Mbuh TP, Amveilla AP, Mendjime P, Donkeng Donfack VF, Youssouf Mfouapon M, Beloko H, et al. Evaluating turnaround time to improve clients’ satisfaction in the tuberculosis reference laboratory in Douala. PLOS One. 2025;20(6):e0323917. doi:10.1371/journal.pone.0323917
BibTeX
@article{Mbuh2025,
author = {Mbuh, Teyim Pride and Amveilla, Anya Priscilla and Mendjime, Patricia and Donkeng Donfack, Valérie Flore and Youssouf Mfouapon, Mohamed and Beloko, Hamada and Annie Prudence, Bisso Ngono and Linda, Esso and Etoundi Mballa, Georges Alain},
title = {Evaluating turnaround time to improve clients’ satisfaction in the tuberculosis reference laboratory in Douala},
journal = {PLOS One},
year = {2025},
volume = {20},
number = {6},
pages = {e0323917},
doi = {10.1371/journal.pone.0323917}
}
EUVIMED