Ferrofluid droplet generation on a zero-thickness nozzle by a magnetic field using a wedge-shaped functional surface
PLOS One · 23.05.2025 · 20 (5) · e0321099
DOI: 10.1371/journal.pone.0321099 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 23.05.2025. Verfasst von Amirhossein Favakeh und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center of Excellence in Energy Conversion (CEEC), Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran. Hauptthemen laut MEDLINE: Magnetic Fields, Microfluidics. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Digital microfluidics for ferrofluids enables the manipulation of discrete droplets on open surfaces and has garnered significant interest as an alternative to traditional continuous-flow microfluidic systems. However, droplet generation within digital microfluidics remain underdeveloped. This study introduces a novel method for droplet generation using a wedge-shaped surface with hydrophilic-hydrophobic patterning, which functions as a two-dimensional flat nozzle. We first demonstrated the concept by investigating gravity-driven water droplet generation on a sloping surface, revealing that smaller droplets form at higher tilting angles, while droplet size remains constant with increasing flow rate. Frequency of droplet formation decreases by 60% with decreasing the tilting angle from 90° to 30°. The proposed method results in significant improvement in frequency (10 Hz) compared to nozzle-based droplet generation (1–5 Hz). We then extend this approach to ferrofluid droplets under an external magnetic field, observing five distinct steps in the formation process. Additionally, a scale analysis of both water and ferrofluid droplet generation provides a deeper theoretical understanding of the governing forces, showing a strong correlation between non-dimensional droplet diameter and the Bond number, following a -1/3 power law (R 2 > 0.95). The derived empirical factor offers precise droplet diameter predictions, with an average error of 3.9%. Finally, inspired by cactus structures, we demonstrate parallelization of the flat nozzles, highlighting the potential for high-throughput droplet generation in digital microfluidic applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Center of Excellence in Energy Conversion (CEEC), Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran.
- Sharif Energy, Water, and Environment Institute (SEWEI), Tehran, Iran.
ORCID-Profile: Amirhossein Favakeh, Mohamad Ali Bijarchi, Mahbod Mohammadrashidi, Mohammad Yaghoobi
Zitieren
APA
Favakeh, A., Bijarchi, M. A., Mohammadrashidi, M., Yaghoobi, M., & Shafii, M. B. (2025). Ferrofluid droplet generation on a zero-thickness nozzle by a magnetic field using a wedge-shaped functional surface. PLOS One, 20(5), e0321099. https://doi.org/10.1371/journal.pone.0321099
Vancouver
Favakeh A, Bijarchi MA, Mohammadrashidi M, Yaghoobi M, Shafii MB. Ferrofluid droplet generation on a zero-thickness nozzle by a magnetic field using a wedge-shaped functional surface. PLOS One. 2025;20(5):e0321099. doi:10.1371/journal.pone.0321099
BibTeX
@article{Favakeh2025,
author = {Favakeh, Amirhossein and Bijarchi, Mohamad Ali and Mohammadrashidi, Mahbod and Yaghoobi, Mohammad and Shafii, Mohammad Behshad},
title = {Ferrofluid droplet generation on a zero-thickness nozzle by a magnetic field using a wedge-shaped functional surface},
journal = {PLOS One},
year = {2025},
volume = {20},
number = {5},
pages = {e0321099},
doi = {10.1371/journal.pone.0321099}
}
EUVIMED