Exploring the hydrophobic effects of quaternary ammonium copolymers on corrosion of casing and tubing steel in acidic solution
PLOS One · 18.06.2025 · 20 (6) · e0320981
DOI: 10.1371/journal.pone.0320981 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 18.06.2025. Verfasst von Ghadeer Mubarak und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Petroleum and Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates. Hauptthemen laut MEDLINE: Quaternary Ammonium Compounds, Steel, Polymers. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
By encouraging improved adsorption onto metal surfaces and creating a more powerful barrier against corrosive chemicals, the hydrophobic property of corrosion inhibitors raises inhibition efficiency and decreases corrosion rates. This work aims to synthesize and describe three quaternary ammonium-based copolymers (AMCs) with different hydrophobic qualities and investigate their ability to inhibit P110 CS corrosion in 15% HCl, which is helpful for casing and tubing. The results showed that AMCs act as efficient corrosion inhibitors, with over 90% inhibition efficiency ( % I E ) at 20 ppm concentration. The electrochemical investigation results indicated that the AMCs with hydrophilic and hydrophobic ratios of 100 ( 5 ), 90:10 ( 6a ), and 80:20 ( 6b ) manifest % I E of 87.74%, 92.12%, and 93.53%, respectively. The electrochemical investigations show that at the metallic surface’s active areas, AMCs successfully replace the pre-adsorbed water molecules. They are categorized as mixed-type corrosion inhibitors because they prevent both anodic and cathodic reactions without appreciably changing the corrosion potential ( E c o r r ). Their adsorption on the metallic surface follows the Langmuir adsorption isotherm. Surface analysis tools like SEM and EDX are utilized to investigate the corrosion prevention mechanism of adsorption. The DFT analysis results show that quaternary nitrogen atoms of hydrophilic and hydrophobic moieties play a key role in the adsorption and charge-sharing processes. Finally, the corrosion prevention mechanism of AMCs is explained using a graphic depiction based on the ideas of electrochemical, surface, and computational studies.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Petroleum and Chemical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates.
- Department of Chemistry, King Fahd University of Petroleum & Minerals, Dhahran, Saudia Arabia.
- Interdisciplinary Research Center for Refining and Advanced Chemicals, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia.
- Department of Mechanical Engineering, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates.
ORCID-Profile: Chandrabhan Verma
Zitieren
APA
Mubarak, G., Verma, C., Jafar Mazumder, M. A., Barsoum, I., & Alfantazi, A. (2025). Exploring the hydrophobic effects of quaternary ammonium copolymers on corrosion of casing and tubing steel in acidic solution. PLOS One, 20(6), e0320981. https://doi.org/10.1371/journal.pone.0320981
Vancouver
Mubarak G, Verma C, Jafar Mazumder MA, Barsoum I, Alfantazi A. Exploring the hydrophobic effects of quaternary ammonium copolymers on corrosion of casing and tubing steel in acidic solution. PLOS One. 2025;20(6):e0320981. doi:10.1371/journal.pone.0320981
BibTeX
@article{Mubarak2025,
author = {Mubarak, Ghadeer and Verma, Chandrabhan and Jafar Mazumder, Mohammad A and Barsoum, Imad and Alfantazi, Akram},
title = {Exploring the hydrophobic effects of quaternary ammonium copolymers on corrosion of casing and tubing steel in acidic solution},
journal = {PLOS One},
year = {2025},
volume = {20},
number = {6},
pages = {e0320981},
doi = {10.1371/journal.pone.0320981}
}
EUVIMED