EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Active learning regression quality prediction model and grinding mechanism for ceramic bearing grinding processing

Longfei Gao iD, Yuhou Wu, Jian Sun, Junxing Tian

PLOS ONE · 07.04.2025 · 20 (4) · e0320494

DOI: 10.1371/journal.pone.0320494 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 07.04.2025. Verfasst von Longfei Gao und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering Training and Innovation, Shenyang Jianzhu University, Shenyang, China. Hauptthemen laut MEDLINE: Ceramics. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China in 2024, National Natural Science Foundation of China in 2021.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study aims to explore quality prediction in ceramic bearing grinding processing, with particular focus on the effect of grinding parameters on surface roughness. The study uses active learning regression model for model construction and optimization, and empirical analysis of surface quality under different grinding conditions. At the same time, various deep learning models are utilized to conduct experiments on quality prediction in grinding processing. The experimental setup covers a variety of grinding parameters, including grinding wheel linear speed, grinding depth and feed rate, to ensure the accuracy and reliability of the model under different conditions. According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. In addition, the experiment also found that increasing the grinding wheel linear velocity and moderately adjusting the grinding depth can significantly improve the machining quality. For example, when the grinding wheel linear velocity is 45 m/s and the grinding depth is 0.015 mm, the Ra value drops to 0.1876 μm. The results of the study not only provide theoretical support for the grinding processing of ceramic bearings, but also provide a basis for the optimization of grinding parameters in actual production, which has an important industrial application value.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsSurface PropertiesDeep LearningRegression AnalysisModels, Theoretical

Autor:innen und Institutionen

  • School of Engineering Training and Innovation, Shenyang Jianzhu University, Shenyang, China.
  • School of Mechanical Engineering, Shenyang Jianzhu University, Shenyang, China.

ORCID-Profile: Longfei Gao

Förderung

  • National Natural Science Foundation of China in 2024
  • National Natural Science Foundation of China in 2021

Zitieren

APA

Gao, L., Wu, Y., Sun, J., & Tian, J. (2025). Active learning regression quality prediction model and grinding mechanism for ceramic bearing grinding processing. PLOS ONE, 20(4), e0320494. https://doi.org/10.1371/journal.pone.0320494

Vancouver

Gao L, Wu Y, Sun J, Tian J. Active learning regression quality prediction model and grinding mechanism for ceramic bearing grinding processing. PLOS ONE. 2025;20(4):e0320494. doi:10.1371/journal.pone.0320494

BibTeX
@article{Gao2025,
  author = {Gao, Longfei and Wu, Yuhou and Sun, Jian and Tian, Junxing},
  title = {Active learning regression quality prediction model and grinding mechanism for ceramic bearing grinding processing},
  journal = {PLOS ONE},
  year = {2025},
  volume = {20},
  number = {4},
  pages = {e0320494},
  doi = {10.1371/journal.pone.0320494}
}
Kostenlos starten →