EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automated sample tracking and parameter adaption for scanning laser optical tomography

Hannes Benecke iD, Firas Almadani, Johannes Heske, Tobias May, Ludger Overmeyer, Sonja Johannsmeier, Tammo Ripken

PLOS ONE · 19.03.2025 · 20 (3) · e0318974

DOI: 10.1371/journal.pone.0318974 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 19.03.2025. Verfasst von Hannes Benecke und 6 weiteren Autor:innen. Beteiligte Einrichtung: Life Sciences Department, Laser Zentrum Hannover e.V, Hannover, Germany. Hauptthemen laut MEDLINE: Tomography, Optical, Lasers. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Regional Development Fund and the state of Lower Saxony, Bundesministerium für Bildung und Forschung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Non-destructive, three-dimensional imaging techniques are of great importance in medicine as well as in technical analysis. In this context, it is of particular importance to generate reliable and repeatable results of high quality. This can be aided by automation of manual processes. One of these imaging techniques, the Scanning Laser Optical Tomography, currently requires manual sample alignment by the user to achieve the highest possible image quality. This alignment demands skillful hand-eye coordination as well as experience on the part of the user, and thus often leads to inconsistent imaging results. To overcome this problem, this paper presents a technique for software-based automation of this challenge. The sample is not physically aligned, but digitally detected and tracked during the acquisition. Residual motion artifacts that interfere with tomographic reconstruction are corrected using a second automation algorithm. The combination of the two new algorithms significantly improves the quality of imaging and also increases the reliability and degree of automation of the system, making it accessible to a wide range of users.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tomography, OpticalLasersAlgorithmsAutomationImaging, Three-DimensionalSoftwareImage Processing, Computer-AssistedHumansReproducibility of ResultsArtifacts

Autor:innen und Institutionen

  • Life Sciences Department, Laser Zentrum Hannover e.V, Hannover, Germany.
  • InSCREENeX GmbH, Braunschweig, Germany.
  • Institute of Transport and Automation Technology, An der Universität, Garbsen, Germany.

ORCID-Profile: Hannes Benecke

Förderung

  • European Union’s Regional Development Fund and the state of Lower Saxony
  • Bundesministerium für Bildung und Forschung

Zitieren

APA

Benecke, H., Almadani, F., Heske, J., May, T., Overmeyer, L., Johannsmeier, S., & Ripken, T. (2025). Automated sample tracking and parameter adaption for scanning laser optical tomography. PLOS ONE, 20(3), e0318974. https://doi.org/10.1371/journal.pone.0318974

Vancouver

Benecke H, Almadani F, Heske J, May T, Overmeyer L, Johannsmeier S, et al. Automated sample tracking and parameter adaption for scanning laser optical tomography. PLOS ONE. 2025;20(3):e0318974. doi:10.1371/journal.pone.0318974

BibTeX
@article{Benecke2025,
  author = {Benecke, Hannes and Almadani, Firas and Heske, Johannes and May, Tobias and Overmeyer, Ludger and Johannsmeier, Sonja and Ripken, Tammo},
  title = {Automated sample tracking and parameter adaption for scanning laser optical tomography},
  journal = {PLOS ONE},
  year = {2025},
  volume = {20},
  number = {3},
  pages = {e0318974},
  doi = {10.1371/journal.pone.0318974}
}
Kostenlos starten →