EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Failure probability and location identification of damaged insulators using normal function and monitored leakage current

Moein Monemi, Seyed Mohammad Shahrtash, Mohsen Kalantar iD

PLOS One · 11.06.2025 · 20 (6) · e0314708

DOI: 10.1371/journal.pone.0314708 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 11.06.2025. Verfasst von Moein Monemi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Center of Excellence for Power System Automation and Operation, School of Electrical Engineering, Iran University of Science and Technology, Tehran, …. Hauptthemen laut MEDLINE: Insulator Elements, Equipment Failure. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main task of insulators is to isolate the conductor from the tower. These insulators must be able to isolate the high voltages of the transmission lines from the tower without having a leakage current (LC). These insulators get damaged over time and may not work properly. Currently, identifying and replacing defective insulators, in addition to being time-consuming, requires frequent and long blackouts to be imposed on the customers. For this reason, this paper examines the problems and failures caused by the use of insulators in networks with different voltage levels and suggests the failure rate for planning the maintenance of these electrical network equipment. Based on this, according to the insulator leakage current data, the failure or damage rate of the insulator equipment will be investigated using the normal distribution. This distribution function will calculate the probability of insulator failure using LC data, and then the failure rate and the priority of insulator maintenance will be measured compared to other data. According to this article, the final goal of the proposed methodology will be to determine the failure rate as well as decision-making for the maintenance of the insulator equipment and finally determine the damaged insulator among all the insulators of the electrical network. By identifying the insulators with a higher failure rate, the maintenance team will decide to repair or replace the damaged insulator before the insulator failure and the fault in the power grid.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Insulator ElementsEquipment FailureProbability

Autor:innen und Institutionen

  • Center of Excellence for Power System Automation and Operation, School of Electrical Engineering, Iran University of Science and Technology, Tehran, Iran.

ORCID-Profile: Mohsen Kalantar

Zitieren

APA

Monemi, M., Shahrtash, S. M., & Kalantar, M. (2025). Failure probability and location identification of damaged insulators using normal function and monitored leakage current. PLOS One, 20(6), e0314708. https://doi.org/10.1371/journal.pone.0314708

Vancouver

Monemi M, Shahrtash SM, Kalantar M. Failure probability and location identification of damaged insulators using normal function and monitored leakage current. PLOS One. 2025;20(6):e0314708. doi:10.1371/journal.pone.0314708

BibTeX
@article{Monemi2025,
  author = {Monemi, Moein and Shahrtash, Seyed Mohammad and Kalantar, Mohsen},
  title = {Failure probability and location identification of damaged insulators using normal function and monitored leakage current},
  journal = {PLOS One},
  year = {2025},
  volume = {20},
  number = {6},
  pages = {e0314708},
  doi = {10.1371/journal.pone.0314708}
}
Kostenlos starten →