EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A speed optimization model for connected and autonomous vehicles at expressway tunnel entrance under mixed traffic environment

Jianrong Cai, Yang Liu iD, Zhixue Li

PLOS ONE · 09.12.2024 · 19 (12) · e0314044

DOI: 10.1371/journal.pone.0314044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 09.12.2024. Verfasst von Jianrong Cai und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Hunan City University, Yiyang, China. Hauptthemen laut MEDLINE: Accidents, Traffic, Automobile Driving, Algorithms, Models, Theoretical. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rear-end collisions frequently occurred in the entrance zone of expressway tunnel, necessitating enhanced traffic safety through speed guidance. However, existing speed optimization models mainly focus on urban signal-controlled intersections or expressway weaving zones, neglecting research on speed optimization in expressway tunnel entrances. This paper addresses this gap by proposing a framework for a speed guidance model in the entrance zone of expressway tunnels under a mixed traffic environment, comprising both Connected and Autonomous Vehicles (CAVs) and Human-driven Vehicles (HVs). Firstly, a CAV speed optimization model is established based on a shooting heuristic algorithm. The model targets the minimization of the weighted sum of the speed difference between adjacent vehicles and the time taken to reach the tunnel entrance. The model’s constraints incorporate safe following distances, speed, and acceleration limits. For HVs, speed trajectories are determined using the Intelligent Driver Model (IDM). The CAV speed optimization model, represented as a mixed-integer nonlinear optimization problem, is solved using A Mathematical Programming Language (AMPL) and the BONMIN solver. Safety performance is evaluated using Time-to-Collision (TTC) and speed standard deviation (SD) metrics. Case study results show a significant decrease in SD as the CAV penetration rate increases, with a 58.38% reduction from 0% to 100%. The impact on SD and mean TTC is most pronounced when the CAV penetration rate is between 0% and 40%, compared to rates above 40%. The minimum TTC values at different CAV penetration rates consistently exceed the safety threshold TTC*, confirming the effectiveness of the proposed control method in enhanced safety. Sensitivity analysis further supports these findings.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Accidents, TrafficAutomobile DrivingAlgorithmsModels, TheoreticalHumansSafetyMotor Vehicles

Autor:innen und Institutionen

  • School of Civil Engineering, Hunan City University, Yiyang, China.
  • School of Traffic and Transportation, Lanzhou Jiaotong University, Lanzhou, China.
  • Hunan City University Design and Research Institute Co., Ltd, Changsha, China.

ORCID-Profile: Yang Liu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Cai, J., Liu, Y., & Li, Z. (2024). A speed optimization model for connected and autonomous vehicles at expressway tunnel entrance under mixed traffic environment. PLOS ONE, 19(12), e0314044. https://doi.org/10.1371/journal.pone.0314044

Vancouver

Cai J, Liu Y, Li Z. A speed optimization model for connected and autonomous vehicles at expressway tunnel entrance under mixed traffic environment. PLOS ONE. 2024;19(12):e0314044. doi:10.1371/journal.pone.0314044

BibTeX
@article{Cai2024,
  author = {Cai, Jianrong and Liu, Yang and Li, Zhixue},
  title = {A speed optimization model for connected and autonomous vehicles at expressway tunnel entrance under mixed traffic environment},
  journal = {PLOS ONE},
  year = {2024},
  volume = {19},
  number = {12},
  pages = {e0314044},
  doi = {10.1371/journal.pone.0314044}
}
Kostenlos starten →