EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of micro-milling machining parameters on residual stresses in alumina bioceramics-a three-dimensional finite element simulation study

Zhen Wang, Yanan Sun iD

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0313588 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Zhen Wang und 1 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, Shandong, China. Hauptthemen laut MEDLINE: Finite Element Analysis, Aluminum Oxide, Ceramics, Stress, Mechanical. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Natural Science Foundation, Guangdong Key Laboratory of Minimally Invasive Surgical Instruments and Manufacturing Technology, Hebei Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The formation and distribution of residual stress during the micro-milling process significantly affect the crack resistance and service life of alumina bioceramics. This study aims to optimize the surface residual stress distribution by adjusting machining parameters, thereby improving the machining quality of alumina ceramics. A three-dimensional finite element model of alumina bioceramics was developed, and numerical simulations were conducted to analyze the effects of feed per tooth, cutting depth, and spindle speed on temperature and residual stress. The study further explores the patterns of residual stress variation. The results show that both surface temperature and residual tensile stress exhibit systematic trends with parameter changes. Specifically, surface residual tensile stress increases with cutting depth initially but decreases sharply once the cutting depth exceeds 25 μm. Residual tensile stress increases with spindle speed, reaching its peak at 21,000 r/min before stabilizing. Additionally, the residual tensile stress rises with feed per tooth at first but gradually declines when the value exceeds 25 μm/z. This research reveals the mechanisms by which micro-milling parameters influence surface temperature and residual stress in alumina bioceramics, providing theoretical guidance for optimizing micro-milling processes. The findings can also be extended to the micro-milling of other hard-to-machine materials, offering broad engineering application potential.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisAluminum OxideCeramicsStress, MechanicalTensile StrengthTemperatureMaterials TestingComputer SimulationSurface Properties

Substanzen

Aluminum Oxide

Autor:innen und Institutionen

  • College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao, Shandong, China.
  • State Key Laboratory of Crane Technology, Yanshan University, Qinhuangdao, Hebei, China.
  • Guangdong Provincial Key Laboratory of Minimally Invasive Surgical Instruments and Manufacturing Technology, Guangdong University of Technology, Guangzhou, Guangdong, China.
  • School of Information Science and Engineering, Yanshan University, Qinhuangdao, Hebei, China.

ORCID-Profile: Yanan Sun

Förderung

  • Shandong Provincial Natural Science Foundation
  • Guangdong Key Laboratory of Minimally Invasive Surgical Instruments and Manufacturing Technology
  • Hebei Natural Science Foundation

Zitieren

APA

Wang, Z., & Sun, Y. (2024). Influence of micro-milling machining parameters on residual stresses in alumina bioceramics-a three-dimensional finite element simulation study. PLOS ONE. https://doi.org/10.1371/journal.pone.0313588

Vancouver

Wang Z, Sun Y. Influence of micro-milling machining parameters on residual stresses in alumina bioceramics-a three-dimensional finite element simulation study. PLOS ONE. 2024. doi:10.1371/journal.pone.0313588

BibTeX
@article{Wang2024,
  author = {Wang, Zhen and Sun, Yanan},
  title = {Influence of micro-milling machining parameters on residual stresses in alumina bioceramics-a three-dimensional finite element simulation study},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0313588}
}
Kostenlos starten →