The research explores the predictive capacity of the shear strength of reinforced concrete walls with different cross-sectional shapes using the XGBoost model
PLOS ONE · 27.11.2024 · 19 (11) · e0312531
DOI: 10.1371/journal.pone.0312531 ↗Kurz gefasst
Querschnittstudie in der Zeitschrift PLOS ONE, online erschienen am 27.11.2024. Verfasst von Hoa Thi Trinh und 3 weiteren Autor:innen. Beteiligte Einrichtung: University of Transport Technology, Hanoi, Vietnam. Hauptthemen laut MEDLINE: Shear Strength, Construction Materials, Machine Learning, Bayes Theorem. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Structurally, the lateral load-bearing capacity mainly depends on reinforced concrete (RC) walls. Determination of flexural strength and shear strength is mandatory when designing reinforced concrete walls. Typically, these strengths are determined through theoretical formulas and verified experimentally. However, theoretical formulas often have large errors and testing is costly and time-consuming. Therefore, this study exploits machine learning techniques, specifically the hybrid XGBoost model combined with optimization algorithms, to predict the shear strength of RC walls based on model training from available experimental results. The study used the largest database of RC walls to date, consisting of 1057 samples with various cross-sectional shapes. Bayesian optimization (BO) algorithms, including BO—Gaussian Process, BO—Random Forest, and Random Search methods, were used to refine the XGBoost model architecture. The results show that Gaussian Process emerged as the most efficient solution compared to other optimization algorithms, providing the lowest Mean Square Error and achieving a prediction R 2 of 0.998 for the training set, 0.972 for the validation set and 0.984 for the test set, while BO—Random Forest and Random Search performed as well on the training and test sets as Gaussian Process but significantly worse on the validation set, specifically R 2 on the validation set of BO—Random Forest and Random Search were 0.970 and 0.969 respectively over the entire dataset including all cross-sectional shapes of the RC wall. SHAP (Shapley Additive Explanations) technique was used to clarify the predictive ability of the model and the importance of input variables. Furthermore, the performance of the model was validated through comparative analysis with benchmark models and current standards. Notably, the coefficient of variation (COV %) of the XGBoost model is 13.27%, while traditional models often have COV % exceeding 50%.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- University of Transport Technology, Hanoi, Vietnam.
ORCID-Profile: Tuan Anh Pham
Zitieren
APA
Trinh, H. T., Pham, T. A., Tho, V. D., & Nguyen, D. H. (2024). The research explores the predictive capacity of the shear strength of reinforced concrete walls with different cross-sectional shapes using the XGBoost model. PLOS ONE, 19(11), e0312531. https://doi.org/10.1371/journal.pone.0312531
Vancouver
Trinh HT, Pham TA, Tho VD, Nguyen DH. The research explores the predictive capacity of the shear strength of reinforced concrete walls with different cross-sectional shapes using the XGBoost model. PLOS ONE. 2024;19(11):e0312531. doi:10.1371/journal.pone.0312531
BibTeX
@article{Trinh2024,
author = {Trinh, Hoa Thi and Pham, Tuan Anh and Tho, Vu Dinh and Nguyen, Duy Hung},
title = {The research explores the predictive capacity of the shear strength of reinforced concrete walls with different cross-sectional shapes using the XGBoost model},
journal = {PLOS ONE},
year = {2024},
volume = {19},
number = {11},
pages = {e0312531},
doi = {10.1371/journal.pone.0312531}
}
EUVIMED