Experimental and simulation study on compressive failure of rock with pre-Y-shaped cracks
PLOS ONE · 14.11.2024 · 19 (11) · e0312344
DOI: 10.1371/journal.pone.0312344 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 14.11.2024. Verfasst von Chao Peng und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Architecture and Engineering, Liaocheng University, Liaocheng, Shandong Province, China. Hauptthemen laut MEDLINE: Compressive Strength. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province, Liaocheng University Doctoral Research Initiation Fund.
Abstract (Originalsprache)
A large number of joints and fissures are prevalent in the rock mass, which has an important influence on the mechanical properties of the rock mass. To study the failure mechanical characteristics of Y-cracked rocks, the paper analyzes the influence of different angles of prefabricated Y-cracked rocks on the mechanical strength characteristics of the rocks and the crack extension evolution through uniaxial compression indoor tests and discrete element PFC 2D numerical simulation. The results indicate that the stress-strain curves of rocks containing prefabricated cracks exhibit five stages: the initial pore-fracture compaction stage, the elastic stage, the crack stable development stage, the crack unstable development stage, and the post-peak rupture. The peak strength of the specimen shows an evolutionary process of decreasing, then increasing, and then decreasing with the increase of the Y-shaped crack angle. The failure of the sample is mainly caused by the shear crack expansion at the crack tip. The different Angle cracks directly affect the mechanical properties of the sample and the generation and evolution of new cracks. The final failure of rock is mainly the result of microcrack propagation, convergence and penetration to form macroscopic damage zone. Finally, combined with PFC numerical simulation, the distribution of micro-cracks and the damage pattern of rock damage are compared and analyzed, and it is found that the two are in good agreement, which reflects the rationality of the model.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- College of Architecture and Engineering, Liaocheng University, Liaocheng, Shandong Province, China.
ORCID-Profile: Wanrong Liu
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
- Liaocheng University Doctoral Research Initiation Fund
Zitieren
APA
Peng, C., Du, X., Li, Z., Liu, W., & Huang, B. (2024). Experimental and simulation study on compressive failure of rock with pre-Y-shaped cracks. PLOS ONE, 19(11), e0312344. https://doi.org/10.1371/journal.pone.0312344
Vancouver
Peng C, Du X, Li Z, Liu W, Huang B. Experimental and simulation study on compressive failure of rock with pre-Y-shaped cracks. PLOS ONE. 2024;19(11):e0312344. doi:10.1371/journal.pone.0312344
BibTeX
@article{Peng2024,
author = {Peng, Chao and Du, Xiaotong and Li, Zhan and Liu, Wanrong and Huang, Bin},
title = {Experimental and simulation study on compressive failure of rock with pre-Y-shaped cracks},
journal = {PLOS ONE},
year = {2024},
volume = {19},
number = {11},
pages = {e0312344},
doi = {10.1371/journal.pone.0312344}
}
EUVIMED