Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis
PLOS ONE · 2024
DOI: 10.1371/journal.pone.0309312 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Junxia Zhou und 3 weiteren Autor:innen. Beteiligte Einrichtung: Ordos Institute of Liaoning Technical University, Ordos, China. Hauptthemen laut MEDLINE: Construction Materials. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Fund of the Liaoning Provincial Education Department, Key Technologies Research on Grouting and Intelligent Pre-control for Hydraulic Tunnel and Its Application, Ordos Institute-LNTU.
Abstract (Originalsprache)
Given the challenges encountered in injecting grout into micro-cracked rock masses, a modified ultrafine cementitious grout material (MUCG) was developed using ultrafine cement, polyvinyl alcohol (PVA) fibers, and a high-efficiency superplasticizer. To identify the optimal ratio of constituents for grouting these rock masses, extreme difference and multiple linear regression analyses were conducted based on test results of flowability and mechanical properties. A mix comprising 9% silica fume, 0.2% bentonite, 0.3% PVA fibers, 0.15% superplasticizer, and 2% setting accelerator was identified as the optimal mix. The microstructure characteristics of the optimal MUCG (MUCGop) grout cemented body were analyzed using XRD, FTIR, BET, and SEM. XRD and FTIR analyses indicated that a substantial amount of C-(A)S-H gel, CH, and AFt were formed within the first 3 days, highlighting the early strength characteristics of MUCGop. Over time, the content of C-A-H stabilized at 22%, the amount of CH decreased from 19% to 14%, whereas the amount of AFt increased to 15.9% by Day 28. Unexpectedly, CaCO 3 content increased due to carbonation, reaching 37.3% by Day 28. BET and SEM analyses demonstrated that the specific surface area and porosity (most probable pore size) gradually decreased over time. At various ages, mesopores (cumulative pore diameter, median pore diameter) initially increased and then decreased. Micro-cracks appeared in the cemented body by Day 7, resulting in a slight decrease in strength (3.92%) from Day 3 to Day 7. The formation of well-developed needle-like AFt, C-(A)S-H gel, and small-volume plate-like CH contributed to uniform cementation and a denser structure. From Day 7 to Day 28, there was a slight increase in strength, by an amount of 10.66%. These findings have significant scientific implications for understanding the mechanisms of grouting reinforcement in micro-cracked rock masses.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Ordos Institute of Liaoning Technical University, Ordos, China.
- School of Civil Engineering, Liaoning Technical University, Fuxin, Liaoning Province 123000, China.
- Institute of Engineering Technology, China Construction Sixth Engineering Bureau Corp., Ltd., Tianjin: 300171, China.
ORCID-Profile: Junxia Zhou
Förderung
- Scientific Research Fund of the Liaoning Provincial Education Department
- Key Technologies Research on Grouting and Intelligent Pre-control for Hydraulic Tunnel and Its Application
- Ordos Institute-LNTU
Zitieren
APA
Zhou, J., Zha, L., Meng, S., & Zhang, Y. (2024). Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis. PLOS ONE. https://doi.org/10.1371/journal.pone.0309312
Vancouver
Zhou J, Zha L, Meng S, Zhang Y. Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis. PLOS ONE. 2024. doi:10.1371/journal.pone.0309312
BibTeX
@article{Zhou2024,
author = {Zhou, Junxia and Zha, Lanchang and Meng, Shiyu and Zhang, Yu},
title = {Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis},
journal = {PLOS ONE},
year = {2024},
doi = {10.1371/journal.pone.0309312}
}
EUVIMED