EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A modified Goldstein filter for interferogram denoising of interferometric imaging radar altimeter based on multiple quality-guided graphs

Jian Liu iD, Huili Zhang, Lihua Wang, Zhiyong Wang iD

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0308636 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Jian Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Nanjing Center, China Geological Survey, Nanjing, Jiangsu Province, China. Hauptthemen laut MEDLINE: Interferometry, Algorithms, Signal-To-Noise Ratio, Radar. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Geological Survey, Ministry of Natural Resources.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming at the characteristics that the signal noise ratio (SNR) gradually decreases from the near to far range of the swath, an adaptive phase filtering algorithm based on Goldstein filtering and combined with multiple quality-guided graphs was proposed. Firstly, the components used to determine the filtering parameters were obtained through residue density, pseudo-coherence coefficient and pseudo-SNR, the three quality-guided graphs. Then, the filter parameters were calculated by weighting the three components. Finally, the size of filtering window was determined according to the account of residues, and the interferometric phase noise was removed in frequency domain. Simulated data, TSX/TDX data and airborne interferometric imaging radar altimeter data were used to verify the performance of the new algorithm. Compared with the results of Goldstein filtering and its improved algorithms, the results showed that the proposed algorithm can effectively filter out phase noise while maintaining the edge characteristics of interferometric fringe. The section of filtering result can well match with the section of simulated pure interfeometric phase. Moreover, the algorithm proposed in this paper can effectively remove the noise in the interferogram of TSX/TDX sea ice data, and the residues’ filtering rate was above 86%, which can effectively remove the phase residues of the sea ice surface while maintaining the characteristics of the sea ice edge. Experimental results showed that the new algorithm provides an effective phase noise filtering method for imaging radar altimeter data processing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

InterferometryAlgorithmsSignal-To-Noise RatioRadar

Autor:innen und Institutionen

  • Nanjing Center, China Geological Survey, Nanjing, Jiangsu Province, China.
  • Spatial Information Technology Application Department, Changiiang River Scientific Research Institute, Wuhan, Hubei Province, China.
  • College of Geodesy and Geomatics, Shandong University of Science and Technology, Qingdao, Shandong Province, China.

ORCID-Profile: Jian Liu, Zhiyong Wang

Förderung

  • China Geological Survey, Ministry of Natural Resources

Zitieren

APA

Liu, J., Zhang, H., Wang, L., & Wang, Z. (2024). A modified Goldstein filter for interferogram denoising of interferometric imaging radar altimeter based on multiple quality-guided graphs. PLOS ONE. https://doi.org/10.1371/journal.pone.0308636

Vancouver

Liu J, Zhang H, Wang L, Wang Z. A modified Goldstein filter for interferogram denoising of interferometric imaging radar altimeter based on multiple quality-guided graphs. PLOS ONE. 2024. doi:10.1371/journal.pone.0308636

BibTeX
@article{Liu2024,
  author = {Liu, Jian and Zhang, Huili and Wang, Lihua and Wang, Zhiyong},
  title = {A modified Goldstein filter for interferogram denoising of interferometric imaging radar altimeter based on multiple quality-guided graphs},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0308636}
}
Kostenlos starten →