EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing a new integrated control solution for electric power steering systems based on a combination of nonlinear techniques

Tuan Anh Nguyen iD

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0308530 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Tuan Anh Nguyen. Beteiligte Einrichtung: Thuyloi University, Hanoi, Vietnam. Hauptthemen laut MEDLINE: Algorithms, Nonlinear Dynamics. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An EPS system is used to improve the stability and safety of the car when steering while also simplifying the steering process. This article introduces a novel control solution for the EPS system called BSSMCPID. This algorithm combines two nonlinear techniques, BS and SMC, with the input signal corrected by a PID technique. This algorithm provides three new contributions compared to existing algorithms: reducing system errors and eliminating phase differences, ensuring stability even when exposed to external disturbances, and reducing power consumption. The system’s stability is evaluated according to the Lyapunov criterion, while the algorithm’s performance is evaluated based on numerical simulation results. According to the article findings, the RMS error of the steering column angle and steering motor angle values (controlled objects) is approximately zero, and the RMS error of the steering column speed and steering motor speed is about 0.01 rad/s, which is much lower than the results obtained with traditional BS and PID controllers. When the EPS system is controlled by the integrated nonlinear method proposed in this work, the output values always closely follow the reference values with negligible errors under all investigated conditions. Additionally, power steering performance increases as speed decreases or driver torque increases, which follows the ideal assisted power steering curve. In general, the responsiveness and stability of the system are always ensured when applying this algorithm.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlgorithmsNonlinear DynamicsElectric Power SuppliesComputer SimulationAutomobile DrivingModels, Theoretical

Autor:innen und Institutionen

  • Thuyloi University, Hanoi, Vietnam.

ORCID-Profile: Tuan Anh Nguyen

Zitieren

APA

Nguyen, T. A. (2024). Designing a new integrated control solution for electric power steering systems based on a combination of nonlinear techniques. PLOS ONE. https://doi.org/10.1371/journal.pone.0308530

Vancouver

Nguyen TA. Designing a new integrated control solution for electric power steering systems based on a combination of nonlinear techniques. PLOS ONE. 2024. doi:10.1371/journal.pone.0308530

BibTeX
@article{Nguyen2024,
  author = {Nguyen, Tuan Anh},
  title = {Designing a new integrated control solution for electric power steering systems based on a combination of nonlinear techniques},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0308530}
}
Kostenlos starten →