Tailored synthesis and optimization of nickel-molybdenum carbide-graphite nanofiber composite for enhanced ethanol electrooxidation
PLOS ONE · 2024
DOI: 10.1371/journal.pone.0308365 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Nasser A M Barakat und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia, Egypt. Hauptthemen laut MEDLINE: Molybdenum, Nickel, Ethanol, Oxidation-Reduction. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A novel nickel-molybdenum carbide-graphite nanofiber composite is introduced as an electrocatalyst for ethanol electrooxidation. The proposed nanofibers have been prepared by calcinating electrospun nanofibers composed of nickel acetate tetrahydrate, molybdenum chloride, and polyvinyl alcohol. The calcination process was conducted at different temperatures (700, 850, and 1000°C) under a nitrogen gas atmosphere with a heating rate of 2.5 deg/min and a holding time of 5 h. Physicochemical characterizations have indicated that nickel acetate is entirely reduced to nickel metal during the sintering process, and molybdenum has bonded with carbon to produce molybdenum carbide. At the same time, the used polymer has been pyrolyzed to produce a carbon nanofiber matrix embedding formed inorganic nanoparticles. Electrochemical measurements concluded that molybdenum content and calcination temperature should be controlled to maximize the electrocatalytic activity of the proposed catalyst. Typically, the oxidation peak current density was 28.5, 28.8, 51.5, 128.3, 25.6, and 3 mA/cm 2 for nanofibers prepared from an electrospun solution containing 0, 5, 10, 15, 25, and 35 wt% molybdenum carbide, respectively. Moreover, it was observed that increasing the calcination temperature distinctly improves the electrocatalytic activity. Kinetic studies have indicated that the reaction order is close to zero with a reaction temperature-dependent value. Moreover, it was detected that the electrooxidation reaction of ethanol over the proposed nanofiber composite follows the Arrhenius equation. The determined activation energy is 33 kJ/mol, which indicates good catalytic activity for the introduced nanofibers. Through the application of a set of visualization-based tools and the general linear model (GLM), the optimal conditions that generate the highest current density were identified. The computations unveiled that the optimal parameter settings are as follows: Mo content at 15 wt.%, methanol concentration of 1.55 M, and reaction temperature of 59°C.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Chemical Engineering Department, Faculty of Engineering, Minia University, El-Minia, Egypt.
- Department of Chemistry, College of Science and Humanities, Ad-Dawadmi, Shaqra University, Shaqra, Saudi Arabia.
- Department of Nuclear Safety Engineering, Nuclear Installations Safety Division, Atomic Energy Authority, Amman, Egypt.
- Department of Mechanical & Nuclear Engineering, College of Engineering, University of Sharjah, Sharjah, UAE.
- Department of Chemical Engineering, College of Engineering, King Saud University, Diriyah Campus, Riyadh, Saudi Arabia.
- Production Engineering & Design Department, Faculty of Engineering, Minia University, El-Minia, Egypt.
ORCID-Profile: Hassan E Gomaa, Khalil Abdelrazek Khalil, Mohamed K Hassan
Zitieren
APA
Barakat, N. A. M., Gomaa, H. E., Khalil, K. A., Al-Mubaddel, F. S., Hassan, M. K., & Abdel-Aty, M. M. (2024). Tailored synthesis and optimization of nickel-molybdenum carbide-graphite nanofiber composite for enhanced ethanol electrooxidation. PLOS ONE. https://doi.org/10.1371/journal.pone.0308365
Vancouver
Barakat NAM, Gomaa HE, Khalil KA, Al-Mubaddel FS, Hassan MK, Abdel-Aty MM. Tailored synthesis and optimization of nickel-molybdenum carbide-graphite nanofiber composite for enhanced ethanol electrooxidation. PLOS ONE. 2024. doi:10.1371/journal.pone.0308365
BibTeX
@article{Barakat2024,
author = {Barakat, Nasser A M and Gomaa, Hassan E and Khalil, Khalil Abdelrazek and Al-Mubaddel, Fahad S and Hassan, Mohamed K and Abdel-Aty, Marwa M},
title = {Tailored synthesis and optimization of nickel-molybdenum carbide-graphite nanofiber composite for enhanced ethanol electrooxidation},
journal = {PLOS ONE},
year = {2024},
doi = {10.1371/journal.pone.0308365}
}
EUVIMED