EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A novel ZVS full-bridge cascaded step-up DC-DC converter with resonant auxiliary circuit for high voltage-gain applications

M Zakir Hossain iD, Jeyraj A/L Selvaraj, N A Rahim

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0306906 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von M Zakir Hossain und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Electronic Engineering, Dhaka University of Engineering & Technology, Gazipur, Bangladesh. Hauptthemen laut MEDLINE: Electric Power Supplies. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High conversion ratio dc-dc converters have received significant attention in renewable energy systems, primarily due to their necessary high-gain characteristics. This research proposes a high step-up ratio full-bridge resonant cascaded (FBRC) dc-dc converter designed for use in photovoltaics (PV), fuel cells (FC), electric vehicles (EV), and other low-voltage output energy sectors to achieve high voltage gain. This converter contains a full-bridge cell with a boost input inductor, a diode-capacitor cascaded stage that replaces the transformer as a voltage multiplier and an inductor-capacitor (LC) parallel-series resonant network across the FB terminal. One of the strategic features of the converter is its high voltage step-up characteristic combined with lower duty cycle operation that limits the maximum current through the active devices, making it particularly suitable for systems that generate low output voltage. In addition, zero-voltage switching (ZVS) is achieved during the turn-off and turn-on operation of the FB switches from 25% to full load, thereby lessening the switching losses. Moreover, the diminished necessity for passive components and the decreased voltage stress on both active and passive devices lead to the use of smaller and more cost-effective components. The theoretical analysis of the proposed converter is validated using a 500 W laboratory-scale prototype wherein high-performance SiC-based MOSFETs have been utilized as switching devices. It offers reduced ripples, with input current ripple at 5% and output voltage ripple at 0.76%. When the load is 400 W and 60 V as the input voltage, the maximum efficiency is found 95.8% at 400 V output voltage. The proposed dc-dc converter, with its high voltage gain and reduced component stress, shows significant promise for application in renewable energy systems.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Electric Power SuppliesEquipment DesignElectricityRenewable Energy

Autor:innen und Institutionen

  • Department of Electrical and Electronic Engineering, Dhaka University of Engineering & Technology, Gazipur, Bangladesh.
  • UM Power Energy Dedicated Advanced Centre (UMPEDAC), HICoE, Wisma R&D, University of Malaya, Kuala Lumpur, Malaysia.

ORCID-Profile: M Zakir Hossain

Zitieren

APA

Hossain, M. Z., Selvaraj, J. A., & Rahim, N. A. (2024). A novel ZVS full-bridge cascaded step-up DC-DC converter with resonant auxiliary circuit for high voltage-gain applications. PLOS ONE. https://doi.org/10.1371/journal.pone.0306906

Vancouver

Hossain MZ, Selvaraj JA, Rahim NA. A novel ZVS full-bridge cascaded step-up DC-DC converter with resonant auxiliary circuit for high voltage-gain applications. PLOS ONE. 2024. doi:10.1371/journal.pone.0306906

BibTeX
@article{Hossain2024,
  author = {Hossain, M Zakir and Selvaraj, Jeyraj A/L and Rahim, N A},
  title = {A novel ZVS full-bridge cascaded step-up DC-DC converter with resonant auxiliary circuit for high voltage-gain applications},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0306906}
}
Kostenlos starten →