EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A surgical instrument motion measurement system for skill evaluation in practical laparoscopic surgery training

Koki Ebina iD, Takashige Abe, Lingbo Yan, Kiyohiko Hotta, Toshiaki Shichinohe, Madoka Higuchi, Naoya Iwahara, Yukino Hosaka, Shigeru Harada, Hiroshi Kikuchi, Haruka Miyata, Ryuji Matsumoto und 12 weitere

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0305693 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Koki Ebina und 23 weiteren Autor:innen. Beteiligte Einrichtung: Graduate School of Information Science and Technology, Hokkaido University, Sapporo, Japan. Hauptthemen laut MEDLINE: Laparoscopy, Clinical Competence. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science, Japan Agency for Medical Research and Development.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study developed and validated a surgical instrument motion measurement system for skill evaluation during practical laparoscopic surgery training. Owing to the various advantages of laparoscopic surgery including minimal invasiveness, this technique has been widely used. However, expert surgeons have insufficient time for providing training to beginners due to the shortage of surgeons and limited working hours. Skill transfer efficiency has to be improved for which there is an urgent need to develop objective surgical skill evaluation methods. Therefore, a simple motion capture–based surgical instrument motion measurement system that could be easily installed in an operating room for skill assessment during practical surgical training was developed. The tip positions and orientations of the instruments were calculated based on the marker positions attached to the root of the instrument. Because the patterns of these markers are individual, this system can track multiple instruments simultaneously and detect exchanges. However due to the many obstacles in the operating room, the measurement data included noise and outliers. In this study, the effect of this decrease in measurement accuracy on feature calculation was determined. Accuracy verification experiments were conducted during wet-lab training to demonstrate the capability of this system to measure the motion of surgical instruments with practical accuracy. A surgical training experiment on a cadaver was conducted, and the motions of six surgical instruments were measured in 36 cases of laparoscopic radical nephrectomy. Outlier removal and smoothing methods were also developed and applied to remove the noise and outliers in the obtained data. The questionnaire survey conducted during the experiment confirmed that the measurement system did not interfere with the surgical operation. Thus, the proposed system was capable of making reliable measurements with minimal impact on surgery. The system will facilitate surgical education by enabling the evaluation of skill transfer of surgical skills.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

LaparoscopyClinical CompetenceHumansSurgical InstrumentsMotionCadaverNephrectomy

Autor:innen und Institutionen

  • Graduate School of Information Science and Technology, Hokkaido University, Sapporo, Japan.
  • Department of Renal and Genitourinary Surgery, Faculty of Medicine, Hokkaido University, Sapporo, Japan.
  • Department of Gastroenterological Surgery II, Faculty of Medicine, Hokkaido University, Sapporo, Japan.
  • Clinical Simulation Center, Faculty of Medicine, Hokkaido University, Sapporo, Japan.
  • Department of Anatomy, Faculty of Medicine, Hokkaido University, Sapporo, Japan.
  • Faculty of Engineering and Design, Kagawa University, Takamatsu, Japan.

ORCID-Profile: Koki Ebina, Taku Senoo, Atsushi Konno

Förderung

  • Japan Society for the Promotion of Science
  • Japan Agency for Medical Research and Development

Zitieren

APA

Ebina, K., Abe, T., Yan, L., Hotta, K., Shichinohe, T., Higuchi, M., Iwahara, N., Hosaka, Y., Harada, S., Kikuchi, H., Miyata, H., Matsumoto, R., Osawa, T., Kurashima, Y., Watanabe, M., Kon, M., Murai, S., Komizunai, S., Tsujita, T., …, & Konno, A. (2024). A surgical instrument motion measurement system for skill evaluation in practical laparoscopic surgery training. PLOS ONE. https://doi.org/10.1371/journal.pone.0305693

Vancouver

Ebina K, Abe T, Yan L, Hotta K, Shichinohe T, Higuchi M, et al. A surgical instrument motion measurement system for skill evaluation in practical laparoscopic surgery training. PLOS ONE. 2024. doi:10.1371/journal.pone.0305693

BibTeX
@article{Ebina2024,
  author = {Ebina, Koki and Abe, Takashige and Yan, Lingbo and Hotta, Kiyohiko and Shichinohe, Toshiaki and Higuchi, Madoka and Iwahara, Naoya and Hosaka, Yukino and Harada, Shigeru and Kikuchi, Hiroshi and Miyata, Haruka and Matsumoto, Ryuji and Osawa, Takahiro and Kurashima, Yo and Watanabe, Masahiko and Kon, Masafumi and Murai, Sachiyo and Komizunai, Shunsuke and Tsujita, Teppei and Sase, Kazuya and Chen, Xiaoshuai and Senoo, Taku and Shinohara, Nobuo and Konno, Atsushi},
  title = {A surgical instrument motion measurement system for skill evaluation in practical laparoscopic surgery training},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0305693}
}
Kostenlos starten →