Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers
PLOS ONE · 2024
DOI: 10.1371/journal.pone.0302729 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Yizhe Huang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Hubei University of Technology, Wuhan, China. Hauptthemen laut MEDLINE: Alloys, Tensile Strength, Stress, Mechanical. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Innovation Driven Development Special Fund Project, Hubei University of Technology Doctoral Research Initiation Fund.
Abstract (Originalsprache)
The constitutive model and modulus parameter equivalence of shape memory alloy composites (SMAC) serve as the foundation for the structural dynamic modeling of composite materials, which has a direct impact on the dynamic characteristics and modeling accuracy of SMAC. This article proposes a homogenization method for SMA composites considering interfacial phases, models the interface stress transfer of three-phase cylinders physically, and derives the axial and shear stresses of SMA fiber phase, interfacial phase, and matrix phase mathematically. The homogenization method and stress expression were then used to determine the macroscopic effective modulus of SMAC as well as the stress characteristics of the fiber phase and interface phase of SMA. The findings demonstrate the significance of volume fraction and tensile pre-strain in stress transfer between the fiber phase and interface phase at high temperatures. The maximum axial stress in the fiber phase is 705.05 MPa when the SMA is fully austenitic and the pre-strain increases to 5%. At 10% volume fraction of SMA, the fiber phase’s maximum axial stress can reach 1000 MPa. Ultimately, an experimental verification of the theoretical calculation method’s accuracy for the effective modulus of SMAC lays the groundwork for the dynamic modeling of SMAC structures.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- School of Mechanical Engineering, Hubei University of Technology, Wuhan, China.
- State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, China.
- Dongfeng Liuzhou Motor Co., Ltd., Liuzhou, China.
- School of Mechanical and Electrical Engineering, Hainan University, Haikou, China.
ORCID-Profile: Yizhe Huang, Zhifu Zhang, Enyong Xu
Förderung
- Guangxi Innovation Driven Development Special Fund Project
- Hubei University of Technology Doctoral Research Initiation Fund
Zitieren
APA
Huang, Y., Duan, X., Wang, J., Zhang, Z., Shi, Y., Huang, B., & Xu, E. (2024). Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers. PLOS ONE. https://doi.org/10.1371/journal.pone.0302729
Vancouver
Huang Y, Duan X, Wang J, Zhang Z, Shi Y, Huang B, et al. Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers. PLOS ONE. 2024. doi:10.1371/journal.pone.0302729
BibTeX
@article{Huang2024,
author = {Huang, Yizhe and Duan, Xueliang and Wang, Jun and Zhang, Zhifu and Shi, Yuanyuan and Huang, Bin and Xu, Enyong},
title = {Interface stress transfer model and modulus parameter equivalence method for composite materials embedded with tensile pre-strain shape memory alloy fibers},
journal = {PLOS ONE},
year = {2024},
doi = {10.1371/journal.pone.0302729}
}
EUVIMED