EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of new materials for electrothermal metals using data driven and machine learning

Chengqun Zhou, Muyang Pei, Chao Wu, Degang Xu, Qiang Peng, Guoai He iD

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0297943 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Chengqun Zhou und 5 weiteren Autor:innen. Beteiligte Einrichtung: Luoyang Institute of Science and Technology, School of Electrical Engineering and Automation, Luoyang, China. Hauptthemen laut MEDLINE: Machine Learning, Alloys, Neural Networks, Computer, Titanium. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Zhuolineng Technology Co., Ltd, National Natural Science Foundation of Hunan province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

After adopting a combined approach of data-driven methods and machine learning, the prediction of material performance and the optimization of composition design can significantly reduce the development time of materials at a lower cost. In this research, we employed four machine learning algorithms, including linear regression, ridge regression, support vector regression, and backpropagation neural networks, to develop predictive models for the electrical performance data of titanium alloys. Our focus was on two key objectives: resistivity and the temperature coefficient of resistance (TCR). Subsequently, leveraging the results of feature selection, we conducted an analysis to discern the impact of alloying elements on these two electrical properties.The prediction results indicate that for the resistivity data prediction task, the radial basis function kernel-based support vector machine model performs the best, with a correlation coefficient above 0.995 and a percentage error within 2%, demonstrating high predictive capability. For the TCR data prediction task, the best-performing model is a backpropagation neural network with two hidden layers, also with a correlation coefficient above 0.995 and a percentage error within 3%, demonstrating good generalization ability. The feature selection results using random forest and Xgboost indicate that Al and Zr have a significant positive effect on resistivity, while Al, Zr, and V have a significant negative effect on TCR. The conclusion of the composition optimization design suggests that to achieve both high resistivity and TCR, it is recommended to set the Al content in the range of 1.5% to 2% and the Zr content in the range of 2.5% to 3%.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Machine LearningAlloysNeural Networks, ComputerTitaniumAlgorithmsMetalsTemperatureSupport Vector Machine

Substanzen

AlloysTitaniumMetals

Autor:innen und Institutionen

  • Luoyang Institute of Science and Technology, School of Electrical Engineering and Automation, Luoyang, China.
  • Light alloy Research Institute, Central South University, Changsha, China.
  • National Key Laboratory for Precision Manufacturing of Extreme Service Performance, Central South University, Changsha, China.
  • Automation Institute, Central South University, Changsha, China.

ORCID-Profile: Guoai He

Förderung

  • Shenzhen Zhuolineng Technology Co., Ltd
  • National Natural Science Foundation of Hunan province

Zitieren

APA

Zhou, C., Pei, M., Wu, C., Xu, D., Peng, Q., & He, G. (2024). Development of new materials for electrothermal metals using data driven and machine learning. PLOS ONE. https://doi.org/10.1371/journal.pone.0297943

Vancouver

Zhou C, Pei M, Wu C, Xu D, Peng Q, He G. Development of new materials for electrothermal metals using data driven and machine learning. PLOS ONE. 2024. doi:10.1371/journal.pone.0297943

BibTeX
@article{Zhou2024,
  author = {Zhou, Chengqun and Pei, Muyang and Wu, Chao and Xu, Degang and Peng, Qiang and He, Guoai},
  title = {Development of new materials for electrothermal metals using data driven and machine learning},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0297943}
}
Kostenlos starten →