EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical investigation of seismic amplification characteristics in loess ridge region of Xiji, northwest China

Da Peng iD, Jingshan Bo, Chaoyu Chang, Wenhao Qi, Xiaobo Li

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0297287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Da Peng und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin, Chin…. Hauptthemen laut MEDLINE: Earthquakes. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The seismic effects on sloped terrain, which are of paramount importance for engineering design and earthquake risk mitigation, have always been a central focus of earthquake engineering research. In this study, generalized geometric models of loess ridges at varying heights were created, and a three-dimensional nonlinear numerical model was established using FLAC3D. Seismic ground motion time histories at different frequencies and actual earthquake ground motion records were input into the model to analyze the peak acceleration amplification effects experienced by the surface of loess ridges when subjected to SV waves. The study’s outcomes reveal that seismic amplification on the slopes of loess ridges is characterized by non-linearity with respect to slope height. Instead, it exhibits rhythmic variations, with the rate of change in these rhythms increasing in correspondence with the frequency of seismic motion and the height of the slope. Under low-intensity seismic motion, a linear increase in acceleration amplification is observed at the ridge’s crest concerning the height of the loess ridge. However, under high-intensity seismic motion, the relationship between amplification and slope height becomes less significant. Typically, the peak acceleration at the ridge’s crest is reported to be 1.5 to 2.5 times that observed at the slope’s base. The amplification effect at the ridge’s crest is more pronounced in the low-frequency and high-frequency segments when compared to the mid-frequency range. Conversely, significant amplification is observed in the high-frequency range in the lower sections of the slope near the base. It is further noted that the amplification effect at the ridge’s crest displays distinct behavior at different frequencies, characterized by narrow frequency bands of maximum amplification, with peak amplification factors exceeding 10 in some cases. These research findings have practical significance and provide valuable references for engineering construction and seismic risk mitigation planning in loess regions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

EarthquakesNonlinear DynamicsMathematicsMotionChina

Autor:innen und Institutionen

  • Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin, China.
  • Hebei Key Laboratory of Earthquake Disaster Prevention and Risk Assessment, Sanhe, China.
  • Institute of Disaster Prevention, Institute of Geological Engineering, Sanhe, China.

ORCID-Profile: Da Peng

Förderung

  • National Natural Science Foundation of China
  • Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration

Zitieren

APA

Peng, D., Bo, J., Chang, C., Qi, W., & Li, X. (2024). Numerical investigation of seismic amplification characteristics in loess ridge region of Xiji, northwest China. PLOS ONE. https://doi.org/10.1371/journal.pone.0297287

Vancouver

Peng D, Bo J, Chang C, Qi W, Li X. Numerical investigation of seismic amplification characteristics in loess ridge region of Xiji, northwest China. PLOS ONE. 2024. doi:10.1371/journal.pone.0297287

BibTeX
@article{Peng2024,
  author = {Peng, Da and Bo, Jingshan and Chang, Chaoyu and Qi, Wenhao and Li, Xiaobo},
  title = {Numerical investigation of seismic amplification characteristics in loess ridge region of Xiji, northwest China},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0297287}
}
Kostenlos starten →